Download Print this page

Starting Easymp; What To Do If You See A Blank Screen - Epson PowerLite 735c Product Information

Epson powerlite 735c: product information
Hide thumbs

Advertisement

Table of Contents
EPSON PowerLite 735c Projector
If a projected image fails to appear, see "What To Do If You
See a Blank Screen" below for help.

Starting EasyMP

1. Select EasyMP as the source by pressing the
on the projector or the
remote control.
2. Insert either the EPSON 802.11b card (for wireless
presentations) or a memory card (for computer-free
presentations) into the projector's card slot. (If you do not
insert a card, you see a screen prompting you to do so.)
For detailed instructions on running your EasyMP
presentation, see "Projecting Wirelessly in Ad Hoc Mode"
on page 7 or "Presenting from a Memory Card" on page 8.

What To Do If You See a Blank Screen

If you see a blank screen or a blue screen with the message
after turning on your computer or video source, try
No Signal
the following:
❏ Make sure the cables are connected correctly.
❏ Make sure the power light is green and not flashing and the
lens cover is off.
❏ Try restarting your computer.
❏ Press the
button on top of the projector or the
Source
or
Comp/EasyMP
Video/S-Video
control to select the correct source. (Allow a few seconds for
the projector to sync up after pressing the button.)
If you're using a PC laptop:
❏ Hold down the
key and press the function key that lets
Fn
you display on an external monitor. It may have an icon
such as
or it may be labeled
seconds for the projector to sync up after pressing it. Check
your laptop's manual or online help for details.
On most systems, the
toggle between the LCD screen and the projector, or
display on both at the same time.
❏ Depending on your computer's video card, you might need
to use the Display utility in the Windows
make sure that both the LCD screen and external monitor
port are enabled. See your computer's documentation or
online help for details.
4
EPSON PowerLite 735c Projector
-
Source
button on the
Comp/EasyMP
button on the remote
. Allow a few
CRT/LCD
or
key lets you
CRT/LCD
®
Control Panel to
If you're using a laptop with Macintosh
You may need to set up your system to display on the
projector screen as well as the LCD screen. Follow these steps:
1. From the Apple menu, select
button
Monitors
2. Click the
Click here
Drag one monitor
icon on top of the
other
3. Drag one monitor icon on top of the other.
If the Arrange option isn't available, you may need to select
one of the Simulscan resolution settings:
1. Click the
Click here
2. Select a
Simulscan
seconds for the projector to sync up after making the
selection.)
2/03
Control Panels
or
.
Monitors and Sound
icon.
Arrange
icon if necessary.
Monitor
resolution as shown. (Allow a few
®
OS 9.x:
, then click
Select a
Simulscan
resolution

Advertisement

Table of Contents
loading

  Related Manuals for Epson PowerLite 735c