Subscribe to Our Youtube Channel
Related Manuals for Case TX130-40 turbo
Summary of Contents for Case TX130-40 turbo
- Page 1 SERVICE MANUAL PRINT No.87595115A TX130--40 turbo TX130--43 turbo TX130--45 turbo TX140--43 turbo TX140--45 turbo TX170--45 turbo...
- Page 2 COMPANY POLICY Company policy, which is one of continuous improvement, reserves the right to make changes in design and specification, without notice and without obligation to modify units previously built. All data given in this book is subject to production variations. Dimensions and weights are approximate only and the illustrations do not necessarily show machines in standard condition.
- Page 3 Service manual TX130- -40 turbo/TX130- -43 turbo/TX130- -45 turbo TX140- -43 turbo/TX140- -45 turbo TX170- -45 turbo TELESCOPIC HANDLERS GENERAL LIST OF CONTENTS SECTION 00 - - GENERAL Description ................Page General instructions .
- Page 4 ................Idler gear case assembly .
- Page 5 GENERAL LIST OF CONTENTS SECTION 27 - - REAR AXLE Description Page Specifications ................. Description .
- Page 6 GENERAL LIST OF CONTENTS SECTION 55 - - ELECTRICAL SYSTEM Description Page Chapter 1 – Electrical system general Electrical equipment specifications ............. . . Electrical system and fuse .
- Page 7 SECTION 00 - - GENERAL GENERAL INSTRUCTIONS IMPORTANT NOTICE All maintenance and repair interventions listed in this Manual must be performed exclusively by the Service Network of the Manufacturer, complying strictly with the indications herein and using, when required, the prescribed special tools.
- Page 8 SECTION 00 - - GENERAL NOTES ON SPARE PARTS Use genuine spare parts guaranteed by the Manufacturer only. Genuine spare parts are the only ones ensuring the same quality, the same life and the same safety as the originally mounted parts, since they are the same as the ones installed in production. Only genuine parts from the manufacturer ensure this guarantee.
- Page 9 SECTION 00 - - GENERAL SAFETY RULES PAY ATTENTION TO THIS SYMBOL This alert symbol announces important messages involving your safety. Read carefully the safety instructions listed and follow the precautions recommended to avoid potential risks and to safeguard your health and your safety. You will find this symbol in the text of this Manual with the following key words: WARNING - - Cautions intended to avoid improper repair interventions involving potential consequences for the safety of the personnel performing the repairs.
- Page 10 SECTION 00 - - GENERAL attachments securely, than move it to level To load/unload a machine from transporter, ◊ ground as soon as possible with a certain margin choose a level surface ensuring firm support to of safety. the wheels of truck or trailer. Anchor the machine securely to the bed of truck or trailer and block Do not trust worn and /or kinked chains and ◊...
- Page 11 ENGINE In case pressures must be measured, use ◊ Loosen the radiator cap very slowly, to release ◊ instruments of adequate capacity. Always follow pressure from the system, before removing it.
- Page 12 SECTION 00 - - GENERAL PRODUCT IDENTIFICATION The Telehandler and its main components are identi- fied by various numbers and letters providing its identification by the Service network. The following information gives the location of the identification plates, of the numbers stamped on the machine and various examples of what can be found on the machine.
- Page 13 SECTION 00 - - GENERAL ENGINE IDENTIFICATION The engine identification information is located on the left--hand side of the engine block. Record the information below for quick reference in case of ne- cessity. MODEL No. SERIAL No. DATE CODE TH001141...
- Page 14 IDENTIFICATION OF 4x3 POWER SHIFT TRANSMISSION The serial number and axle type is printed on the plate located on the front of the axle housing. Record the information below for quick reference in the case of necessity. MODEL NO. SERIAL NO.
- Page 15 SECTION 00 - - GENERAL ENVIRONMENTAL CONSIDERATIONS The following recommendations can be useful: 4. Avoid spillage when draining used coolant mix- tures, engine oils, transmission and hydraulic fluids, brake fluid. After draining, do not mix Become familiar and make sure you have well •...
- Page 16 SECTION 00 - - GENERAL MAINTENANCE TECHNIQUES GENERAL NOTICES If a hose swells, this indicates that there is an internal leakage due to a structural failure. This condition Clean the outside of all the components prior to per- deteriorates very quickly and causes the failure of forming any type of repair.
- Page 17 SECTION 00 - - GENERAL SPECIFIC SEALING COMPOUNDS The following sealing compounds must be used, complying with the indications provided by the Manual: SEALANTS COMMERCIAL NAME Anaerobic sealant LOCTITE 518 (liquid gasket) RTV silicon sealant LOCTITE SUPERFLEX 593,595 or 596 LOCTITE ULTRA BLUE 587 DOW CORNING SILASTIC 732 GENERAL ELECTRIC RTV 103 or 108 Pipe sealant...
- Page 18 SECTION 00 - - GENERAL MINIMUM TIGTENING TORQUES FOR FASTENERS IN NEWTON- -METRES (Nm) FOR NORMAL INSTALLATION APPLICATIONS METRIC BOLTS AND LOCK NUTS CLASS 8.8 CLASS 10.9 LOCK NUT CLASS 5.8 CL 8 PLATED NOMINAL PLATED PLATED with BOLT PLATED Zn/Cr DIMENSION PLATED...
- Page 19 SECTION 00 - - GENERAL MINIMUM TIGTENING TORQUES FOR FASTENERS IN NEWTON- -METRES (Nm) FOR NORMAL INSTALLATION APPLICATIONS INCH MEASUREMENT SCREWS AND LOCK NUTS LOCK NUTS GRADE SAE 2 GRADE SAE 5 GRADE SAE 8 PLATED PLATED NOMINAL PLATED PLATED NOMINAL Zn/Cr PLATED...
- Page 20 SECTION 00 - - GENERAL GENERAL NOTE: “The Manufacturer” pursues a policy of constant improvements, thus reserves the right to modify at any moment technical and design data, without notice, and without any obligation to modify the machines previously manufactured. All the data provided in this Manual are subject to variations in production.
- Page 21 SECTION 00 - - GENERAL TH100012 TX130- -40 turbo - - TX130- -43 turbo - - TX130- -45 turbo 1200 mm 1260 mm 3120 mm 4396 mm 1617 mm 2730 mm 5850 mm 5204 mm 7050 mm 980 mm 2050 mm 3890 mm 402* mm 2445 mm...
- Page 22 SECTION 00 - - GENERAL TX130- - 40 turbo - - TX130- - 43 turbo - - TX130- - 45 turbo (without stabilisers or with stabilisers raised and with rear axle lock) ° ° ° ° ° TX130- -40 TX130- -43 TX130- -45 °...
- Page 23 SECTION 00 - - GENERAL TX130- - 40 turbo - - TX130- - 43 turbo - - TX130- - 45 turbo (without stabilisers or with stabilisers raised and without rear axle lock) ° ° ° ° ° TX130- -40 TX130- -43 TX130- -45 °...
- Page 24 SECTION 00 - - GENERAL TX130- -43 turbo (with stabilisers lowered) TX130- -43 TH00R031...
- Page 25 SECTION 00 - - GENERAL TX130- -45 turbo (with stabilisers lowered) TX130- -45 TH00R032...
- Page 26 SECTION 00 - - GENERAL TH100017 TX140- -43 turbo - - TX140- -45 turbo 1200 mm 1260 mm 3120 mm 4552 mm 1837 mm 2730 mm 6070 mm 5390 mm 7270 mm 980 mm 2050 mm 3890 mm 402* mm 2445 mm 1100 mm * Value measured with tyres 405/70x24...
- Page 27 SECTION 00 - - GENERAL TX140- -43 turbo - - TX140- -45 turbo (with stabilisers raised and with rear axle lock) ° ° ° ° TX140- -43 ° TX140- -45 ° ° ° TH001076...
- Page 28 SECTION 00 - - GENERAL TX140- - 43 turbo - - TX140- - 45 turbo (with stabilisers raised and without rear axle lock) TX140- -43 TX140- -45 TH00R033...
- Page 29 SECTION 00 - - GENERAL TX140- -43 turbo (with stabilisers lowered) TX140- -43 TH00R034...
- Page 30 SECTION 00 - - GENERAL TX140- -45 turbo (with stabilisers lowered) TX140- -45 TH00R035...
- Page 31 SECTION 00 - - GENERAL TH100022 TX170- -45 turbo 1200 mm 1260 mm 3120 mm 4598 mm 1902 mm 2730 mm 6135 mm 5445 mm 7335 mm 980 mm 2050 mm 3890 mm 402* mm 2445 mm 1100 mm * Value measured with tyres 405/70x24...
- Page 32 SECTION 00 - - GENERAL TX170- -45 turbo (with stabilisers raised) TX170- -45 TH001025...
- Page 33 SECTION 00 - - GENERAL TX170- - 45 turbo (with stabilisers raised and without rear axle lock) TX170- -45 TH001079 NOTE: This diagram must be considered when the rear axle lock manual control is selected.
- Page 34 SECTION 00 - - GENERAL TX170- -45 turbo (with stabilisers lowered) TX170- -45 TH00R036...
- Page 35 SECTION 00 - - GENERAL 88 kW (110 CV) ENGINE DATA Turbo Aftercooler Model Diesel Number of cylinders 4 in--line Bore Stroke Displacement 4500 Total displacement 17 : 1 Firing order 1.3.4.2 Low idle 800--900 Max. idle 2300--2350 Nominal speed 2200 Maximum torque 480 Nm...
- Page 36 SECTION 00 - - GENERAL TRANSMISSION POWERSHIFT – T 12000 4x3 = 4 speeds forward and 3 reverse Speed Ratio Stall speed (RPM) 4.025 2349 2.048 2309 1.000 2248 0.662 2170 ELECTRICAL SYSTEM Alternator 65 amp. Type of battery 12 Volt grounded negative Optional 160 Amph Battery cut--off by switch...
- Page 37 SECTION 00 - - GENERAL HYDRAULIC SYSTEM Gear pump Hydraulic and steering system Hydraulic system pressure: Main system pressure 240 bar Steering system pressure 175 bar TORQUES Wheel nuts Cab securing screws RADIATOR COOLANT The antifreeze must be changed every 1000 hours or every 24 months NOTE: To reduce deposits and limit corrosion, the water used in the cooling system must not exceed the follow- ing limits: Total hardness...
- Page 38 SECTION 00 - - GENERAL TYRE PRESSURES The tables are provided for reference only. For specific information relative to inflation pressures and the load of the tyres used, please consult your Dealer. AXLE WEIGHT AXLE WEIGHT TYRE FRONT PRESSURE Model (static, empty) (Dynamic, nominal) DIMENSION...
- Page 39 SAE 10W- -30 Sulphur contents in fuel. Engine oil replacement interval is shown in Section 3. Local fuel can however have a high sulphur content: in this case engine oil replacement interval must be changed as follows: SAE 15W- -40...
- Page 40 SECTION 00 - - GENERAL NOTE: Fluid and lubricant quantities are meant as overall. Drained fluid or lubricant quantities might not correspond to those stated because part of the oil or fluid could be trapped by some machine components.
- Page 41 This as a preview PDF file from best-manuals.com Download full PDF manual at best-manuals.com...
Need help?
Do you have a question about the TX130-40 turbo and is the answer not in the manual?
Questions and answers