Battery Pack (Fig 6); Scooter Serial Number (Fig 7) - Shoprider GK4 User Manual

BATTERY PACK (FIG 6)

The battery pack is specially designed for easy access and transportability. The reset button
is located on the battery pack. The reset button is designed to protect the electronics on your
scooter. If this button pops the scooter will not turn on, nor operate, simply push button to
reset. The 3-pin plug-in port is on the battery pack and serves two purposes: connecting
batteries to scooter and charging the battery pack. The plug-in port also has a release button;
that prevents the connections from coming apart. The 3-pin round plug is removed by gently
pressing the release button while pulling the plug out. The battery pack is held onto the unit
by Velcro straps lining the bottom of the battery pack and unit.
Reset Button

SCOOTER SERIAL NUMBER (FIG 7)

The scooter serial number is located under the seat. It is an alphanumeric combination of 13
numbers and letters. Shoprider recommends that you write the serial number down on the
back of this manual for further reference.
Serial number
Battery
Charging
Port
Connection
Release Button
Figure 7
11
Velcro Strips
Figure 6
Reset Button