Ink Cartridge - Epson Stylus Color 660 Product Information

Note:
Always load paper into the sheet feeder short edge first. Envelopes
should be loaded flap edge first, with the flap side down.
You can extend the minimum bottom margin to 0.12 inch (3.0 mm) by
selecting Maximum as the Printable Area Setting on the printer driver
Paper menu. However, print quality may decline in the expanded
area. Before printing large jobs, print a single sheet to confirm print
quality.
A
B-L, B-R
EPSON 4 6-inch Photo Paper
(dotted lines indicate perforations)
A: The maximum top margin is 0.67 inch (17.0 mm).
B–L,
B–R: The maximum left and right margin is 0.24 inch (6.1 mm).
C: The maximum bottom margin is 0.24 inch (6.1 mm).

Ink Cartridge

Black ink cartridge
Specification (S020187)
Color(s) Black
Print capacity* 540 pages text (ISO/IEC
10561 letter pattern,
380 pages graphic (5%
coverage)
Cartridge life 2 years from production date (if unopened)
(within 6 months after opening package, at 77 °F
[25 °C])
Storage 4 to 104 °F ( 20 to 40 °C)
temperature 1 month at 104 °F (40 °C)
Transit 22 to 140 °F ( 30 to 60 °C)
temperature 1 month at 104 °F (40 °C)
120 hours at 140 °F (60 °C)
Freezing 3.2 °F ( 16 °C)
temperature**
Dimensions 0.7 (W) 2.1 (D)
inches
19.8 (W) 52.7 (D)
38.5 (H) mm
* The print capacity may vary, depending on the images you print
and how often you clean the print head.
** Ink thaws and is usable after approximately 3 hours at
77 °F (25 °C).
C
Color ink cartridge
(S020191)
Cyan, Magenta, Yellow
300 pages (15% coverage)
.4 °F ( 18 °C)
1.5 (H) 1.7 (W) 2.1 (D) 1.5 (H)
inches
42.9 (W) 52.7 (D)
38.5 (H) mm
To ensure good results, use genuine EPSON cartridges
and do not refill them. Other products may cause
damage to your printer not covered by EPSON's
warranties.
Mechanical
Paper feed Friction
method
Paper path Sheet feeder, rear entry
Sheet feeder
capacity 100 sheets of 17 lb (64 g/m
Dimensions
Storage Width: 16.9 inches (429 mm)
Depth: 9.1 inches (231 mm)
Height: 6.1 inches (157 mm)
Printing Width: 16.9 inches (429 mm)
Depth: 23.7 inches (602 mm)
Height: 11.6 inches (295 mm)
Weight 11.5 lb (5.2 kg) without the ink cartridges
Electrical
Specification 120 V Model
Input voltage 99 to 132 V
range**
Rated frequency
range
Input frequency
range
Rated current 0.4 A (max. 0.5 A)
Power consumption Approx. 16 W (ISO/IEC 10561 Letter Pattern)
Approx. 5 W in standby mode
Energy Star compliant
* This product is also designed for an IT power system phase-to-
phase voltage of 220 240 V.
** Check the label on the back of the printer for your printer's
voltage.
Environmental
Temperature
Operation 50 to 95 °F (10 to 35 °C)
Storage 4 to 140 °F ( 20 to 60 °C)
1 month at 104 °F (40 °C)
Transit* –4 to 140 °F (–20 to 60 °C)
120 hours at 140 °F (60 °C)
Humidity (without condensation)
Operation 20 to 80% RH
*
Storage 5 to 85% RH
*Stored in shipping container
8/99
EPSON Stylus COLOR 660
2
) paper
220 240 V Model*
198 to 264 V
50 to 60 Hz
49.5 to 60.5 Hz
0.2 A (max. 0.3 A)
EPSON Stylus COLOR 660
- 3