Load The Paper - Epson Stylus Color 3000 Quick Setup Manual

Caution:
Never turn off the printer
when the Pause light is
flashing. However, if the
Pause light is still flashing
after 15 minutes and the
printer has stopped
moving or making noise,
you may turn off the
printer.
5. Close the ink compartment door.
The printer begins charging the advanced ink delivery
system. Charging takes up to 10 minutes, with the
light flashing until it's finished; then the
on. Do not turn off the printer or interrupt this important
process or you'll use up more ink than necessary.
When the
Pause
process is finished.
6. Press the
Pause

Load the Paper

To test the printer operation, load several sheets of letter-size
plain paper in the built-in sheet feeder as described in this
section. For instructions on loading other types of paper or
using the other paper feeders, see your User's Guide.
1. Make sure the paper release lever is set back to the single
sheet position.
5
light stops flashing, the ink charging
button to turn off the
Pause
light stays
Pause
light.
Pause