Inserting A Memory Card; Removing A Memory Card - Epson PictureMate Product Information

A Bluetooth ® -enabled device (requires an optional
Bluetooth Photo Print adapter). See the Using PictureMate
Without a Computer book for details.
Your computer. See the Using PictureMate With a Computer
booklet and the on-screen User's Guide (included on your
PictureMate CD) for details.
However your photos are stored, make sure the image files
meet these requirements:
JPEG files or uncompressed Tiff files only
The file storage device should comply with DCF (Design
rule for Camera File systems) Version 1.0
Resolutions ranging from 160 × 160 to 4600 × 4600 pixels
Your PictureMate recognizes and prints the first 999 photos
on your memory card or device.

Inserting a Memory Card

Note: Insert just one card at a time. The card does not go in all the
way. See above for supported photo file formats.
1. Press to turn on PictureMate.
On
2. Open the memory card door.
3. Insert the memory card into one of the three slots.
®
CompactFlash
(bottom)
Memory Stick
(middle)
SmartMedia
(top)
4. Push the card in carefully until it stops (it won't go in all the
way). When it is in, the card light comes on.
Card
light
5. Close the memory card door.
Now you can print a proof sheet of all the photos on your card
using the PictureMate Print Wizard (see page 4). You can also
choose photos and layouts for printing from the Main Menu
(see page 5).

Removing a Memory Card

Make sure the card light is not flashing, then pull the card
straight out of the slot.
Caution: Do not remove a card while the card light is flashing; you
may lose photos on your card.
4/04
PictureMate
or Microdrive TM
SD (Secure Digital) or
MMC (MultiMediaCard)
(middle)
®
xD Picture Card
(top)
TM
PictureMate
TM
- 3