Contents USB operation Introduction Usage of USB device Safety is important PVR FILE SYSYTEM MENU In the box CHECK PVR FILE SYSTEM Safety information FORMATTING Electrical information TROUBLESHOOTING Instruction Battery safety guidelines CARE AND MAINTENANCE Safety warnings SPECIFICATIONS Parts identification Front , side and above view Rear view Wall Mounting...
Instruction This equipment has been designed and manufactured to DON’T remove any fixed cover as this may expose meet international safety standards but, like any electrical dangerous voltages. equipment, care must be taken if you are to obtain the best DON’T obstr uct the ventilation openings of the equipment results and safety is to be assured.
Page 6
Battery safety guidelines Used correctly, domestic batteries are a safe and dependable source of portable power. Problems can occur if they are misused or abused- resulting in leakage or, in extreme cases, fire or explosion. Here are some simple guidelines to safe battery use designed to eliminate any such problems. Take care to fi...
Safety warnings Use in a vehicle Note Moisture For use only when vehicle is Stationar y. • To reduce the risk of fire, electric shock or product damage, do not expose this unit to rain, moisture, • Read all the instructions carefully before using the unit dripping or splashing.
Page 8
Safety warnings Batteries • Batteries used in the remote control for this unit are easily swallowed by young children and this is dangerous. • Keep loose batteries away from young children and make sure that the battery holder tray is secure in the remote control.
Parts identification Front, side and above views Standby LED & Remote control sensor HDMI 1 Coaxial HDMI 2 12V/24V (ARC) PCMCIA card slot for external Conditional Access (C A) modules 2 USB jack 3 12V/24V DC input terminal 4 HDMI 1/HDMI 2 in socket. Refer to HDMI lead on p.13, p.21, p.22. , 5 Coaxial audio out 6 AV input 7 Headphone output terminal...
Parts identification Disk in/out door 1. Power on/ OK Press to turn on TV. When TV is on press and hold (more than 2 seconds) to activate on-screen E-dial menu. 2. Vol -/ Menu Decrease volume. When on-screen E-dial menu is activate, choose to access OSD menu.
Operating the TV Connecting the aerial Connecting external devices The Quick Start guide shows the simplest and most Warning! Make sure the TV and all ancillary equipment are unplugged from the mains effective way of connecting to external devices. These before making any connections and alternate methods are listed below.
Operating the TV Select the wanted SOURCE, select “Antenna” for DVBT scan First Time Installation First Time Installation Please select you reception mode! Antenna Satellite Switching on Select When this page is presented, please press OK. Note: Unless otherwise stated, all references to buttons refer to the remote control.
Operating the TV Tuning in satellite TV For convenience your 320TRS-v2 Comes with a default channel list from first switch on, you are able to Press MENU and select Channel, highlight Auto Tuning edit and sor t this list to your own personal preference. If and press OK.
Operating the TV Basic operation Source selection TV channel selection Press the Source button to display the source menu.The following sources are available: CH /CH Press the buttons or use the Numeric buttons on the remote control to select a channel you require. Input Source Digital TV Return...
Operating the TV Favourite(Digital TV only) Information You can enter the Favourite menu while watching a channel You can view the programme information for the channel you are watching by pressing the Info button. The following menu by pressing the button.The following menu will appear on is a typical example of the programme details that will be the screen:...
Operating the TV Tint - Allows you to increase or decrease the level of tint of the picture (only NTSC signal) Menus Colour Temperature - Allows you to change the colour tones of the screen.You can choose from the following The menus allow you to adjust and control the TV.
Operating the TV Programme Edit Channel Setup(Digital TV only) Press the PAGE+ PAGE- buttons to select a channel. This menu allows you to adjust the channels and the channel You can do the following to a Digital channel using the settings.
Change Password - Allows you to change the password: TV Options Note: The default password is 0000. 1.Enter the new password. This menu allows you to change the general settings for digital 2.Re-enter the new password to confirm it. The password is TV.The following options are available: now changed.
Operating the TV HDMI CEC Function settings This menu allows you to change the following functions: TIME HDMI CEC - Connect an ARC compatible sound system to Clock 14/Mar 21:01 the HDM12 and set the settings as below to use TV remote Off...
Operating the TV Electronic Programme Guide The Electronic Programme Guide displays information about current and future programmes for the highlighted channel. To stop the recording at any time, press the STOP button on Guide Press the button to display the Electronic Programme the remote control.
Operating the TV Viewing Recordings Pause Live TV To view any recorded programmes, press the List button To pause live TV, press the Time Shift button, the on the remote. (Depending on file size there can be a small programme will stop. To continue watching press the Play button and the programme will resume.
Operating the TV Common Interface Slot 3.Select the relevant digital channel 4.Detailed information on the Smart card in use is displayed. The Common Interface (Cl) slot is designed to accept the 5.Press the button to access the card menu.Refer to the Conditional Access Module (CAM) and Smart card in order to module instruction manual for setting details.
USB operation Usage of USB device USB refers to Universal Serial Bus. Most of USB devices on the market are USB2.0. Here are some common types of USB 2.0 devices: Monitors, Communication devices, Audio Human Input Device(HID), Mass storage drives etc. Most flash memory, USB HDD etc.
Operating the TV Insert USB or HDD. Then enter SELECT DISK Operating the TV. If using a USB device, default disk name is DISK C: To format your memory device and create a PVR file, press If using a HDD, and HDD has two or more partitions, the system allows you to select C:/D: disk and so on by the MENU key on the remote .
Operating the TV 3. FORMATTING File System Size PVR File System Type FAT32 PVR File System Size SETUP if you want to format disk, Please note all data will be lost. select star t to format, during formating, do not power off the TV, select EXIT cancel.
Page 29
TROUBLESHOOTING To assist in locating possible faults use the help guide below. Troubleshooting No picture, no sound Check that TV is correctly plugged in. Check the TV is connected to a suitable power source. Check the electrical supply is turned on. Ensure that the TV is turned on.
Guarantee Your AVTEX television is covered by a 3 year parts and labour guarantee.This means that if the television develops a fault during the guarantee period we arrange a repair free of charge.Your original receipt acts as your guarantee so please...
Page 31
LED panel 32" 698.4(H)×392.85(W) 0.36375(H)×0.36375(W) 6.5ms 4000:l 30000 Frame rate : 50~65Hz 60~75Hz l6.7 Million colours 1920× l080;75Hz Mini AV l00V-240V-,50/60Hz 12V,4 A 72l.4mmx422.6mmx4I .7mm 5.82kg...
Page 32
Features Full HD Electronic Programme Guide (EPG) Two HDMI sockets Wide Viewing Angle USB Interface Model: L320TRS-v2...
Need help?
Do you have a question about the L320TRS-v2 and is the answer not in the manual?
Questions and answers