ANN-BUS Devices
Mounting/Installation
The N-ANN-RLY relay module can be mounted inside the FACP main circuit board chassis. An
optional ANN-MBRLY mounting bracket allows mounting of the N-ANN-RLY in the lower right
hand corner of the FACP cabinet instead of or in conjunction with the mounting provisions under
the main FACP circuit board chassis. Refer to the documentation supplied with the module for
information on installation.
N-ANN-RLY Board Layout and Connection to FACP
Figure 2.25 illustrates the N-ANN-RLY board showing locations of screw terminals for connection
to the FACP and the DIP switches for selecting the ANN-BUS ID number.
RP-2002 Series Manual — P/N 53039:E6 1/26/2017
ANN-BUS (ID#)
Address DIP switch
FACP
-24 VDC
+24 VDC
Figure 2.26 N-ANN-RLY Board Layout and Connection to FACP
Primary ANN-BUS
Installation
N-ANN-RLY
49