If you need to fax additional pages, place your original on the scanner glass or
in the Automatic Document Feeder. Then press
need to fax another page, press
Note:
If the fax number is busy, you see a redialing message and the
WorkForce 500 Series redials after one minute. To redial immediately, press
Redial/Pause.
Other Ways to Dial a Fax Number
In addition to manual transmission, here are some other ways you can enter a fax
number:
■
If you've connected a telephone to the WorkForce
500 Series, you can dial the fax number from the
phone. When you see the screen at right, select
, then press
Send
Note:
Don't hang up the phone until you begin transmitting
the fax.
■
To select a speed dial entry, press
Backspace
dial entry you want to use, then press
■
To redial the last fax number you used, press
. The last fax number is displayed on the
Pause
screen.
■
Press
Menu
(You cannot send or receive any faxes until the delayed fax has been sent or
cancelled.)
■
Press
Menu
another fax machine to which you have dialed (such as a fax information
service). Change the setting back to
20
Faxing a Document or Photo
.
OK
. Select or type the number of the speed
and select
Fax Delay
and select
Fax Mode
OK
. Your document is faxed.
Back
Speed Dial/
.
OK
Redial/
to specify a different time to send your fax.
to select
Polling
when you're finished.
Sending
to continue. If you do not
mode to receive a fax from