Selecting A Range Of Photos; Using Dpof To Select Your Photos - Epson Stylus Photo RX600 Product Information

Epson Stylus Photo RX600
Selecting One or More Photos to Print
Follow these steps to print a single photo or selected photos on
a memory card:
1. Press the
Memory Card
2. Use the u and d buttons to highlight
3. Use the l and r buttons to choose
the button.
OK
4. To print one or a few photos, use the l and r buttons to
navigate to the first photo you want to print, then use the u
and d buttons to choose the number of copies you want to
print. Do this for each photo you want to print, then press
the button.
OK
To print all the photos on the card, select
press the button.
OK
5. Continue with "Printing the Selected Photos" on page 10 to
finish laying out your photos and setting up your print job.

Selecting a Range of Photos

You can select a range of photos to print (such as photos 1
through 5) and print them as a group.
1. Press the
Memory Card
2. Use the u and d buttons to highlight
3. Use the l and r buttons to choose
the button.
OK
4. Use the l and r buttons to choose the first photo in the
range, then press the
OK
5. Use the l and r buttons to choose the last photo in the
range, then press the
OK
6. Continue with "Printing the Selected Photos" below to
finish laying out your photos and setting up your print job.

Using DPOF to Select Your Photos

If your camera supports DPOF (Digital Print Order Format),
you can use it to select photos for printing before you insert
the card in your printer. See your camera's instruction manual
for details.
1. Press the
Memory Card
2. Use the u and d buttons to highlight
3. Use the l and r buttons to choose
button.
OK
4. Continue with the next section to finish laying out your
photos and setting up your print job.
Epson Stylus Photo RX600
10 -
button.
Custom Print
, then press
Select Print
and
All Print
button.
Custom Print
, then press
Range Print
button.
button.
button.
Custom Print
, then press the
DPOF
Printing the Selected Photos
1. Press the u and d buttons to highlight
press the l and r buttons to choose the type of paper that is
loaded in the printer. Refer to the following table.
(These are the settings you should choose when you're not
.
using your computer to print.)
Loaded paper type
Plain paper
Epson Photo Paper
Epson Glossy Photo Paper
Epson Premium Glossy Photo Paper
Epson Premium Semigloss Photo Paper
Epson Semigloss Scrapbook Photo Paper
Epson Premium Luster Photo Paper
Epson Matte Paper Heavyweight
PremierArt Matte Scrapbook Photo Paper
Epson ColorLife Photo Paper
Epson Iron-On Transfer Paper
Epson Glossy Photo Greeting Cards
2. Press the u and d buttons to highlight
.
use the l and r buttons to select the size of paper you've
loaded.
3. Use the u and d buttons to highlight
l and r buttons to select the desired layout option (such as
BorderFree
4. Use the u and d buttons to highlight
the l and r buttons to choose
.
Photo
5. If you like, you can make further changes before printing.
Use the u and d buttons to choose one of the options listed
(such as
Brightness
and r buttons to select the desired setting.
6. When you're done adjusting print settings, press the
button.
7. If you want to print multiple sets of your entire print job,
press the u and d buttons to choose the number of sets to
print (1 to 99).
.
8. Press the x
printing.
Note:
To cancel a print job while printing, press the y Stop button.
2/04
Layout
, , etc.).
2-up
Resolution
Normal
, , etc.). Then use the l
Fit to Frame
button or x button to begin
Color B&W
, then
Paper Type
Paper Type
setting
Plain
GlossyPhoto
Prem.Glossy
Semigloss
Prem.Luster
Matte
ColorLife
Iron-on
Greeting
, then
Paper Size
, then use the
, then use
, , or
Photo Best
OK