Fit To Frame; Fit To Frame; Hi Speed; Hi Speed - Epson Stylus Photo RX510 Operation Manual

12. Fit to frame

By turning this function on, you can print images fit the print size
you have selected. It automatically trims the areas of an image that
extend beyond the margins of the selected print size. Either the top
and bottom, or the left and right areas of photo is trimmed,
depending on the aspect ratio of the original photo and the selected
print size. The default setting is On.
Option
On
Off
Note:
If the photo's vertical to horizontal ratio is higher than 1:2, it is treated as a
panoramic panoramatic photo; you cannot print it to fit the frame regardless
of the setting.

13. Hi speed

By turning this function on, you can perform bidirectional printing
(printing from right to left and from left to right). Turn this function
on or off according to your printing purpose. The default setting is
On.
Option
On
Off
Note:
If the print head is misaligned, vertical lines appear during bidirectional
printing. If this happens, you may need to align the print head (see
"Aligning the Print Head" on page 79).
55
Printing Directly from a Memory Card
Description
Trims the image.
Does not trim the image.
Printing speed
Faster
Slower
Printing quality
Normal
Fine