Functional Description - Makita 9924DB Instruction Manual

Hide thumbs Also See for 9924DB:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
000331
Yasushi Fukaya
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
BELT SANDER SAFETY WARNINGS
1.
Hold
power
surfaces, because the belt may contact its
own cord. Cutting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
2.
Ventilate your work area adequately when you
perform sanding operations.
3.
Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
4.
Always use the correct dust mask/respirator for
the material and application you are working with.
5.
Always use safety glasses or goggles. Ordinary
eye or sun glasses are NOT safety glasses.
6.
Hold the tool firmly with both hands.
7.
Make sure the belt is not contacting the
workpiece before the switch is turned on.
8.
Keep hands away from rotating parts.
9.
Do not leave the tool running. Operate the tool
only when hand-held.
10. This tool has not been waterproofed, so do
not use water on the workpiece surface.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
rules for the subject product. MISUSE or failure to
follow the safety rules stated in this instruction
manual may cause serious personal injury.
2.3.2015
Director
tool
by
insulated

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure that the tool is switched off and
unplugged before adjusting or checking function
on the tool.
Switch action
Fig.1
CAUTION:
Before plugging in the tool, always check to see
that the switch trigger actuates properly and
returns to the "OFF" position when released.
GEA010-1
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and
then push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, and then release it.
Speed change
For 9402 only
Fig.2
GEB015-3
To change the tool speed, press the "H" side of the
speed change switch for high speed, or the "L" side for
low speed.
gripping
CAUTION:
Use the speed change switch only after the tool
comes to a complete stop.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and
unplugged before carrying out any work on the
tool.
Installing or removing abrasive belt
Fig.3
Pull the lever all the way out and install the belt over the
rollers, and then return the lever to the original position.
CAUTION:
When installing the belt, make sure that the
direction of the arrow on the back of the belt
corresponds to the one on the tool itself.
Fig.4
Adjusting belt tracking
Fig.5
While the belt is running, use the adjusting knob to
center the belt tracking. Failure to do so can result in
frayed belt edges and wear on the sander frame.
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

94019402

Table of Contents