Checkout - Honeywell Aquastat L4006 Installation Manual

Hide thumbs Also See for Aquastat L4006:
Table of Contents

Advertisement

CHECKOUT

WARNING
Explosion Hazard.
Can cause serious injury, death or property damage.
This product is intended for use only in systems with a
pressure relief valve.
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET
Section 1. Product And Company Identification
Product Name: Heat Conductive Compound
MSDS ID: DS9021
Synonyms: MS1699
Product Use: Heat conductive material used to enhance
contact and heat transfer in temperature sensor
applications.
Ingredient
#2 Lithium Complex Grease (70%):
Mineral Oil
Mineral Oil
Lithium Hydrostearate/
Sebacate
Complex
Zinc Alkyldithiophosphate
Aluminum Paste (30%):
Aluminum, as Al
Aliphatic Petroleum Distillates 8052-41-3
Stearic Acid
Aromatic Petroleum Distillates 64742-95-6
a Additional Information: Part No. 120650 (0.5 oz tube); Part No. 107408 (4 oz can); Part No. 197007 (5 gallon container).
May also contain minute amounts of lithium and molybdenum lubricant compounds..
Section 3. Hazard Identification
Acute Health Effects:
Skin: Excessive contact may cause skin irritation and der-
matitis.
Eye: Direct contact with eye will cause irritation.
Inhalation: No adverse effects are expected.
Ingestion: Ingestion of product may cause nausea, vomiting
and diarrhea.
Chronic Health Effects
Existing skin rash or dermatitis may be aggravated by
repeated contact.
OSHA Hazard Classifications: None.
Carcinogenicity: Not considered to be a carcinogen by
either OSHA, NTP, IARC, or ACGIH.
CAS Number
64742-65-0
64742-62-7
68815-49-6
68649-42-3
7429-90-5
57-11-4
:
Check to make certain that the Aquastat Controller is prop-
erly installed and adjusted. Put the system into operation
and observe the action of the controller through several
cycles to make certain it provides proper control of the
system as described in the OPERATION section. Make
any additional adjustments necessary for assuring comfort
requirements.
Manufacturer: Honeywell Inc., 1985 Douglas Drive North,
Minneapolis, MN 55422.
Date Released: October 8, 1999
NFPA Ratings:
Health 0; Flammability 1; Reactivity 0; Personal Protection B
Section 2. Composition
Information on Ingredients
Percent
35-50
20-25
4-9
0-2
20-25
10-15
1-2
1-2
Section 4. First Aid Measures
Eye Contact: Flush eyes with water for 15 minutes. Remove
any contact lenses and continue to flush. Obtain medical
attention if irritation develops and persists.
Skin Contact: Remove excess with cloth or paper. Wash
thoroughly with mild soap and water. Obtain medical atten-
tion if irritation develops and persists.
Ingestion: Contact physician or local poison control center
immediately.
Inhalation: Remove patient to fresh
17
Aquastat L4006,7,8;L6006,7,8
PEL
5 mg/m³
5 mg/m³
5 mg/m³
5 mg/m³
15 mg/m³
10 mg/m³
2900 mg/m³
525 mg/m³
5 mg/m³
5 mg/m³
60-2104—01
TVL

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents