Introduction
1.1
Objective
The objective of this application guide is to help the user become familiar with the steps
required to set up and calibrate the Pointek CLS200 (Standard Version). This application guide
applies to any models manufactured after August 1, 2010.
1.2
Equipment
Equipment Description
Pointek CLS200 (Standard Electronics Version) Capacitance Switch
1.3
Disclaimer
Note
While every effort is made to verify the following information, no warranty of accuracy or
usability is expressed or implied.
4
MLFB/A5E Number
Pointek CLS200 Capacitance Switch (Standard Version)
Application examples, 09/2020, AG080910
1