GigaTent COOPER 3 Owner's Manual

TENT INCLUDES

TENT SET UP

1) Spread the tent body on the ground.
2) Fully open all poles.
3) Thread poles through poles sleeves atop of tent (Figure A).
4) Insert all pole ends into into pins located at the bottom corners of tent (Figure B).
5) Stake the tent down (Figure C).
6) Tie the tent to the top with the rope (Figure D).
TENT SET UP

ATTACHING THE RAINFLY

7) Thread poles into sleeve and insert ends into pole pockets.
8) Drape fly over tent.
9) Insert end of poles into grommet on the pole sleeves (Figure E).
10) Hook corners of fly to the metal rings on bottom corners of tent (Figure F).
11) Attach "hook and loop" straps to poles (Figure G).
12) Tie the guyropes to the fly and stake down (Figure H).
ATTACHING RAIN FLY DIAGRAM
X 2

ASSEMBLY INSTRUCTIONS

A
B
E
F
D
C
G
H
COOPER 3
Owner's Manual
Model # BT017
10' x 8' x 71"
IMPORTANT
We strongly suggest setting up your
new tent before going camping to
insure that all parts are present and
to familiarize yourself with the tents
assembly. This will have a great
e ect on how well you enjoy your
camping trip.