Battery Information; General Weighing Operation; Tare Operation - Zanussi ZSE22222DF User Manual

Thank you for buying a ZANUSSI product
Please read instruction manual carefully before using the product for the first time.
Please keep instructions in a safe place for reference
1

BATTERY INFORMATION

This scale operates on 1 – 3 volt CR2032 lithium battery (installed). There is a strip
under the lithium battery cover to prevent battery drain in shipping. Please remove the
strip before continuing with these instructions.
Replace the battery when the Low Battery icon " Lo " appears in the middle of the
display, or the readings grow dim or irregular. To replace the battery:
• Use one 3 volt CR2032 lithium battery
• Remove the cover
• Remove the old battery from the compartment.
• Place the new battery with the "+" sign up into the battery compartment
• Replace the battery compartment cover
NOTE: Please recycle or dispose of batteries per local regulations
WARNING: Batteries may pose a choking hazard. Do not let children handle batteries
2

GENERAL WEIGHING OPERATION

• Place the scale on a hard, level surface
• Press the "ON/OFF' button to turn the scale on. The display will turn on, then shows
zero when it is ready for use. If the display does not show zero, press the ON/OFF'
button to reset (tare) the scale to zero
• Your scale is set at the factory to weigh in grams. To switch between pound/ounces (lb
oz), kilograms (kg), grams (g), and ounces (oz), press the "UNIT" button
• Place the item to be weighed on the center of the platform. The weight will display. As
you add weight, the weight displayed increases
• The scale will turn off automatically after approximately 1 minute of non-use or if there
is no change in weight after approximately 3 minutes. Press and hold the "ON/OFF'
button to turn the scale off manually
3

TARE OPERATION

You may wish to weigh ingredients in a bowl or other container (not included).In this
case, you will need to tare, or offset, the weight of the bowl so that only the weight of
the ingredients is displayed.
• Choose a container that will safely balance on the platform without tipping or falling. Do
not use a heavy container, as this might reduce the maximum capacity of the scale
• While the scale is off, place the empty container on the scale platform. Turn the scale
on. The display will turn on and then show zero. The weight of the container has been
zeroed out
• Add the ingredient to be weighed. The weight of the ingredient alone will display
• The weight of additional ingredients may be tared out as well. For example, if a recipe
calls for ½ lb rice and ½ lb beans, place the rice into the bowl. Once the correct amount