Formatting The Player; Understanding File Systems; Reformatting Your Player In Windows; Tv Out - Ematic EM404CAM User Manual

19.0 Formatting the Player

19.1 Understanding File systems

Your player is like a small hard drive of data, and like any such storage
device, it has a file system. If you wish to reformat the player's file system,
you may use any standard formatting tools as long as it is formatted with
FAT32 file system.

19.2 Reformatting Your Player in Windows

Follow these steps to reformat your player:
Connect the player to your computer via
the USB cable.
Double-click My Computer. Find the icon
representing the player, which will
probably appear as Removable Disk.
Right-click the player's icon and select
Format.
Make certain the file system is FAT32;
otherwise the player will not work!
Click Start.
When the Warning message appears, click
OK. Once started DO NOT remove
the USB cable as this may damage
the player!
Once the formatting is complete, you may access the drive through My
Computer.

20.0 TV OUT

You can connect your player to your TV and use it to watch movies, view
photos, or listen to music. To do so, go to System Settings>Other Settings on
the player, then set the TVOUT setting to „ON‟ (from this menu, you can also
select between PAL and NTSC formats, in the USA, this should be NTSC).
Finally, connect the small end of the included RCA cables into the TV-OUT port
on your player, and connect the large end of the cables to your television. Now
when you play media on the device it will stream it to the television. You must
turn „OFF‟ the TVOUT Setting in order to watch videos on the device again.
E4 Series User Manual Page 25 of 27