Axis W101 User Manual page 12

Axis body worn solution
Configure your system
Example - Camera settings for user group 1 on page 12 and Example - Camera settings for user group 2 on page 12 show how different
camera and recording settings can be used to create camera profiles for specific needs.
Example - Camera settings for user group 1
The following needs were identified for a user group:
• Get maximum image and audio quality.
• Record events (video and audio) that happened during the 90 seconds before the recording button (Front button) was
pressed.
• Record data showing the location where the recording took place.
• Enable the camera user to operate without being detected, by allowing the camera user to turn off all camera feedback
(LED, sound, vibration).
• Allow the user to turn off the microphone while recording.
The table below shows the Recording and Camera settings that fulfill the needs listed above.
Need
Maximum image and audio quality
Record before pressing button
Record location data
Operate without being detected
Turn off the microphone while recording
1. Enables dual audio channels, optimized for processing in raw format. This results in a slightly higher bitrate.
2. The pre-buffer has a dedicated space on the camera storage. When using the maximum resolution 1080p in very complex scenes with a lot
of movement, or in low light, the pre-buffer memory can get full, resulting in a slightly shorter pre-buffer time than configured in AXIS
Body Worn Manager.
3. Location data is for outdoor use only. We recommend turning Location data off for indoor use.
Example - Camera settings for user group 2
The following needs were identified for a user group:
• Allow user to record video and audio continuously during a long shift, by saving storage and battery.
• Help people understand that they are being video recorded (by making sure that the camera always indicates that it
is recording).
• Allow the user to turn off the microphone while recording.
The table below shows the Recording and Camera settings that fulfill the needs listed above.
Need
Record continuously
Show that camera is recording
Turn off the microphone while recording
Recording settings
Resolution: 1080p
Audio: On
Select Optimized for post-processing
2
Pre-buffer : On
Length: 90s
Audio: On
3
Location data : On
Recording settings
Resolution: 720p
Audio: On
De-select Optimize for post-processing
1
Location data : Off
12
Camera settings
1
Select Allow silent mode
Select Allow audio recording off
Camera settings
De-select Allow silent mode
Select Allow audio recording off