Page 1
PCLK-120 Dual LED-Panel Light Kit for Copy Stand and Tabletop Photography INSTRUCTIONS...
Page 2
Introduction Thank you for choosing Impact. The Impact Dual LED Panel Light Kit allows you to light a copy stand or tabletop surface so you can shoot small products and documents with optimal lighting. These lighting supports clamp onto 1.45-inch-thick surfaces and offer five-way adjustment so you can position the light at any angle.
Page 3
Overview 1. LED panel 8. Cable tie 2. Cold-shoe adapter 9. On/off switch 3. Tilt locking knob 10. Power cable 4. Support locking knob 11. Pivot locking knob 5. Horizontal support 12. Table clamp 6. Horizontal support adapter 13. Vertical support 7.
Page 4
Setup Table Clamp / Light Assembly Follow these instructions for both support arms. 1. Unscrew and remove the clamp’s pivot locking knob. 2. Align the vertical support with the clamp. Screw the pivot locking knob through the washer and into the clamp assembly. Tighten until secure. 3.
Page 5
4. Slide the horizontal support’s adapter over the vertical support. Tighten the adapter’s locking knob until secure. Caution: The LED support adapters ship with a loose support brake inside the adapter. Be careful not to lose the support brake when removing the packing paper from inside the adapter.
Page 6
Lighting Adjustments LED Panel Tilt Lighting Support Pivot LED Panel Rotation and Lighting Support Vertical Horizontal Adjustment...
Specifications Light type LED count 96 each Max output 20 W Color temp 5600 K Beam angle 120° Light intensity @ 1 ft. (30.5 cm): 5213 lx / 484.3 fc @ 3 ft. (91.4 cm): 656 lx / 60.9 fc Voltage 100–240 V AC Avg lamp life...
One-Year Limited Warranty This Impact product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair...
Need help?
Do you have a question about the PCLK-120 and is the answer not in the manual?
Questions and answers