Navigator; Map - Nokia 500 User Manual

Hide thumbs Also See for 500:

Table of Contents

N a v i g a t o r

4. Navigator

The navigation device has an internal GPS receiver that you can use to

detect your current position and for turn-by-turn navigation.

When you switch on the device, the map view of the

Navigator

application is displayed. To use navigation, press the menu key, and tap

Navigator. Alternatively, tap

The device receives signals from a number of GPS satellites to determine

your current position. For GPS satellite navigation, place the device in a

location with an unobstructed view to the sky.

Establishing a GPS connection may take from a couple of seconds to

several minutes. The connection time depends on how well the GPS

receiver can receive satellite signals. Establishing the connection takes

longer if you have not used GPS for several days or are very far away

from the last location you used it.

If the quality of the GPS connection is good,

is displayed. If the

connection is not good enough for navigation,

is displayed; in this

case, check that the device has an unobstructed view to the sky.

To copy navigation files to the memory card, see

"DVD,"

p. 8. Copy all the

navigation files to the Cities folder.

When the device has a GPS connection,

Navigator

shows your current

location on a map. The map has two modes: tracking mode and

browsing mode.

Table of Contents