Alarm; Camera Control; Add (Pair) A Camera; View A Camera - Motorola MBP360 User Manual

4.5

Alarm

M
1. Press the
<
2. Press the
+
3. Press the
6h 4h 2h
( , , ). (The default setting is Alarm OFF.)
If an alarm time is selected, the parent unit will beep for about
45 seconds after every 6, 4 or 2 hour period, and the A alarm icon
will flash red.
4.6

Camera Control

4.6.1

Add (pair) a camera

M
1. Press the
<
2. Press the
del/add/view/scan
and the
+
3. Press the
press the OK button to confirm.
CAM 1 CAM 2
4. /
DOWN button to select the desired CAM, and press the OK button
to start searching for a camera unit. The green audio level LED will
flash rapidly while searching.
5. Press and hold the PAIR button underneath the Indoor Camera
until the parent unit finds the camera, beeps and the picture from
the camera appears.
NOTE
A camera can only be registered to one parent unit at any one time.
4.6.2

View a camera

M
1. Press the
<
2. Press the
highlighted and the
+
3. Press the
press the OK button to confirm.
CAM 1 CAM 2
4. /
DOWN button to select desired CAM, and press the OK button to
view the picture from that camera.
MBP360 Parent Unit Menu Options
button and the menu bar will pop up.
LEFT button or
-
UP button or
button and the menu bar will pop up.
LEFT button or
menu will pop up.
-
UP button or
CAM 3 CAM 4
/ / will pop up, press the
button and the menu bar will pop up.
LEFT button or
del/add/view/scan
-
UP button or
CAM 3 CAM 4
/ / will pop up, press the
>
RIGHT button until
DOWN button to select the alarm time
>
RIGHT button until
DOWN button to select
>
RIGHT button until
menu pops up.
DOWN button to select
A
is highlighted.
C
is highlighted,
ADD
, and
+
UP button or
C
is
VIEW
, and
+
UP button or
-
-
21