Using The Baby Monitor Mbp360; Setup; Pan And Tilt; Night Vision Mode - Motorola MBP360 User Manual

3. Using the Baby Monitor MBP360

3.1 Setting up
 Place the Indoor Camera in a convenient location (e.g. on a table)
and point the camera lens towards the area you want to monitor.
 Mount the outdoor Camera on the wall under the shelter
(recommended) and point the camera lens towards the area you want
to monitor.
 Adjust the Indoor Camera's head angle by rotating the camera up,
down, left and right until you are satisfied with the image in the parent
unit.
NOTE
Do not place the Indoor Camera within baby's reach! If there is
interference with the picture or sound, try moving the units to different
locations, and ensure they are not close to other electrical equipment.
3.2

Pan and Tilt

The camera can be remotely controlled from the parent unit.
+
1. Press the
downward.
<
2. Press the
3.3

Night Vision Mode

The Indoor Camera has 8 high-intensity infrared LEDs for picking up
clear images in the dark. When the built-in photo sensor detects a low
level of ambient light, the LEDs will automatically activate and the screen
on the parent unit will display in black and white. The
displayed on the screen.
3.4

Talk Mode

Press and hold the T TALK button on the parent unit to talk to your
baby through the Indoor Camera's loudspeaker. The T icon will be
displayed at the top of the LCD screen.
18
-
UP button or
>
LEFT button or
DOWN button to tilt upward or
RIGHT button to pan left or right.
Using the Baby Monitor MBP360
N
icon will be