Table of Contents
Advertisement
Available languages
Available languages
10 • ENGLISH
•
Wash the filters regularly using warm, soapy water
and ensure that it is completely dry before using
again. The cleaner the filter is, the better the product
will perform.
•
It is very important that the filter is correctly in position
before use.
NOZZLE / ACCESSORIES (FIG. I–K)
•
Figure I - A crevice tool ( 4 ) is built into the nozzle and
can be extended as shown in Figure I by pulling the
extension piece until it locks into position.
REPLACING THE FILTERS
The filters should be replaced every 6 to 9 months and
whenever worn or damaged. Replacement filters are
available from your Black+Decker dealer.
•
Remove the old filters as described above.
•
Install the new filters as described above.
MAINTENANCE
Bowls and filters can be washed thoroughly; however, use
only mild soap and a damp cloth to clean the main part of
the vacuum. Important! To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment (other
than those listed in this manual) should be performed
by authorized service centers or other qualified service
personnel, always using identical replacement parts.
DETECCIÓN DE PROBLEMAS
If the product does not work, follow the instructions below.
If this does not solve the problem, please contact your local
BLACK+DECKER repair agent.
Unit will not start. Battery not charged
•
Check battery charging requirements.
Battery will not charge. Charger not plugged in
•
Plug charger into a working outlet. Refer to "Important
Charging Notes" for more details.
•
Check current at receptacle by plugging in a lamp or
other appliance.
Check to see if eceptacle is connected to a light switch
which turns power off when you turn out the lights.
Battery will not charge. Surrounding air temperature
too hot or too cold
•
Move charger and tool to a surrounding air temperature
of above 40 degree F (4,5°C) or below 105 degree F
(+40,5°C).
PROTECTING THE ENVIRONMENT
Separate collection. This product must
not be disposed of with normal household
waste. Should you find one day that your
BLACK+DECKER product needs replacement,
or if it is of no further use to you, do not dispose
of it with household waste. Make this product
available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled and used
again. Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide
for separate collection of electrical products from
the household, at municipal waste sites or by the
retailer when you purchase a new product.
The instructions for appliances incorporating a battery that
contains materials that are hazardous to the enviroment
shall give details on how to remove the battery and shall
state that:
1. The battery must be removed from the appliance
before it is scrapped.
2. The appliance must be disconnected from the supply
mains when removing the battery.
3. The battery is to be disposed of safety.
SERVICE INFORMATION
BLACK+DECKER offers a full network of companyowned
and authorized service locations. All BLACK+DECKER
Service Centers are staffed with trained personnel to
provide customers with efficient and reliable power tool
service. For more information about our authorized service
centers and if you need technical advice, repair, or genuine
factory replacement parts, contact the BLACK+DECKER
location nearest you, or visit us at:
www.blackanddeckerhome.com
Advertisement
Table of Contents
