Operation; Dust Extraction - Ozito JSW-6800 Instruction Manual

4. DUST EXTRACTION

A dust extractor can be fitted to the jigsaw dust extractor adaptor
to remove dust and chips while cutting. The adaptor can also be
removed if it gets in the way.
Dust Extraction Adaptor
1 Align the tabs on the adaptor with the recess in the extraction port,
then rotate clockwise to secure in position.
0
2 To remove, rotate anti-clockwise and pull away from the tool.
2
1
3
0

OPERATION

5. CONTROLS
CAUTION! TO REDUCE THE RISK OF ELECTRICAL
SHOCK, THE USE OF A RESIDUAL CURRENT DEVICE
(RATED 30mA OR LESS) IS RECOMMENDED.
On/Off Trigger
1 To start cutting, squeeze the
on/off trigger.
2 To stop cutting, release the
on/off trigger.
Lock-On Button
The lock-on switch allows the jigsaw to continue operating without
having to hold the on/off switch down.
1 Hold in the on/off trigger,
then press the lock on
button.
b
a
3 To stop the tool, squeeze
2
1
and release the on/off 3
0
trigger.
2
1
3
0
2
1
3
0
2 You can now release the on/
off trigger & lock on button.
2
1
3
0
2
1
3
0