Cleaning The Impellers; Lower Impeller; Upper Impeller - Beko DVN05Q20W User Manual

Hide thumbs Also See for DVN05Q20W:
Table of Contents

Advertisement

Cleaning the impellers

Clean the impellers at least once a week in
order for the machine operates efficiently.

Lower impeller

Check if the holes on the lower impeller (1)
are clogged. If they are clogged, remove
and clean the impeller. You can pull the
lower impeller up to remove it.
(depends on model)
Check if the holes on the lower impeller
assembly are clogged. If they are clogged,
remove and clean the impeller assembly.
(depends on model)
C
To remove and clean the lower impeller
assembly together, hold by one hand from
the (C) points shown in the figure and pull
up to remove. After cleaning, follow these
steps in reverse order to reinstall the
impeller assembly.
Do not try to rotate the impeller by
holding its ends. Trying to rotate the
end sections may cause the gear
system within the impeller to break.

Upper impeller

Check if the holes on the upper impeller (1)
are clogged. If they are clogged, remove
and clean the impeller. Turn its nut to left to
remove the upper impeller.
Make sure that the nut is tightened well
when installing the upper impeller.
37/EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents