12
Before Using the Cooktop
COOKWARE RECOMMENDATIONS
INCORRECT
On/Off
• Cookware not centered on Cook-
ing Zone surface.
• Curved or warped pan bottoms or
sides.
• Pan does not meet the minimum
size required for the Cooking Zone
used (See Fig. 19).
• Pan bottom rests on cooktop trim
or does not rest completely on the
cooktop surface.
• Heavy handle tilts pan.
PLEASE NOTE - ANY one of the incorrect conditions listed above in Fig. 20 may be
detected by the sensors located below the ceramic cooktop surface. If the cookware
does not meet any of these conditions, one or more of the Cooking Zones will not
heat indicated by an
before attempting to activate the cooktop.
On/Off
POWER
Fig. 20
F F F F F
in the affected Cooking Zone display. Correct the problems
CORRECT
On/Off
On/Off
• Cookware centered correctly on
Cooking Zone surface.
• Flat pan bottom & straight sides.
• Pan size meets or exceeds the
recommended minimum size for
the Cooking Zone (See Fig. 19).
• Pan rests completely on the
Cooktop surface.
• Pan is properly balanced.
POWER