Receiving, Handling And Storage - Siemens 3AH3 Instruction Manual

6
Receiving, handling
and storage
Introduction
This portion of the instruction manual
covers the receiving, handling and storage
instructions for a type 3AH3 vacuum circuit
breaker operator module. This section of the
instruction manual is intended to help the
user identify, inspect and protect the circuit
breaker operator module prior to its
installation.
Receiving procedure
Make a physical inspection of the shipping
container before removing or unpacking the
circuit breaker operator module.
Check for shipment damage or indications
of rough handling by the carrier. Check each
item against the manifest to identify any
shortages.
Accessories such as the manual charging
crank, the racking crank (if applicable) and
the split plug jumper (if applicable) are
shipped separately.
Heavy weight.
Improper lifting or hoisting can result in death, serious injury or
property damage.
Obtain the services of a qualified rigger prior to hoisting the circuit
breaker to assure adequate safety margins in the hoisting equipment
and procedures to avoid damage.
Shipping damage claims
Important: The manner in which visible
shipping damage is identified by consignee
prior to signing the delivery receipt can
determine the outcome of any damage
claim to be filed.
Notification to carrier within 15 days for
concealed damage is essential if loss
resulting from unsettled claims is to be
eliminated or minimized.
1. When the shipment arrives, note
whether the equipment is properly
protected from the elements. Note the
trailer number the equipment arrived on.
Note also any blocking of equipment.
During unloading, check the actual
equipment delivered to verify it agrees
with the delivery receipt.
2. Make immediate inspection for visible
damage upon arrival and prior to
disturbing or removing packaging or
wrapping material. This should be done
prior to unloading when possible. When
total inspection cannot be made on
vehicle prior to unloading, close
inspection during unloading must be
performed and visible damage noted on
the delivery receipt. Take pictures if
possible.