Error Codes - Hitachi SF-125XE Operating & Installation Instructions Manual

Error
Description
code
C1
Water is not
supplied
C2
Water does not
drain
C3
The tub does not
spin
C4
C8
The lid cannot be
locked
C9
The lid lock
cannot be
released
Ch
The spinning
speed does
not reach the
specifi ed value.
■
If warning sign such as "F0", "F9"...etc. are shown in the display, stop operating the washer
immediately and contact an authorized service dealer or a service agent for further inspection
and/or repairing.
24

Error Codes

Things to check
●
Is the tap open?
●
Has dirt collected in the water supply inlet
fi lter?
●
Are the water pipes or water supply hose
frozen?
●
Has the water supply been disrupted?
●
Is the drain hose blocked?
●
Is the drain hose twisted, crushed, or
frozen?
●
Is the drain hose connected correctly?
●
Is the drain outlet too high?
●
Is the lid open?
●
Is the laundry all on one side of the tub?
●
Does the laundry include too many thick
items like cotton blankets or jeans or too
many large items like sheets?
●
Is the washing machine wobbling, or is the
fl oor under the washing machine slanted?
●
Are there any unwashable things in the
tub? →Page 8: Preparation of the laundry
(sorting the laundry)
●
Is the lid closed?
●
Are there any foreign objects in the lock?
●
Are there any foreign objects in the lock?
●
Check if there is too much powder
detergent?
●
Check if the drain hose is clogged?
●
Check if the drain hose is installed
correctly?
Solution
Check the tap, water
supply inlet fi lter, water
pipes, and water supply
hose.
Check the drain hose
and the drain outlet.
Close the lid.
Add a few more items
to wash. (If there is only
one item in the tub,
it is likely to become
unbalanced.)
Check that the lid is
completely closed. Check
that there are no foreign
objects in the lock.
Turn the power off and
then on again and wait a
little while. If the lid is still
locked, contact a service
center for repair.
Check the amount of
powder detergent used.
Check the drain hose
and its installation.