Checking Timer Recording Details; Canceling A Timer Recording; Stopping A Timer Recording In Progress; Timer Recording Troubleshooting - NEC NDRV-60 Manual

Timer Recording (Continued)

Checking Timer Recording Details

Programming can be checked whenever the Recorder
is turned on. Press TIMER REC twice.
• Use v / V to select a timer recording.
• Press ENTER to edit the selected program.
Timer Record menu appears.
• Press CLEAR to delete the selected program
from the Timer Record List.
Timer Record List
Media PR Date Start Time Length
11 16/05 Sun 10:12
Edit CLEAR Delete

Canceling a Timer Recording

You can clear a timer setting anytime before the record-
ing actually starts.
• Use v / V to select a program you want to erase on
the Timer Recorder List. If you want to erase the
program, press CLEAR.

Stopping a Timer Recording in Progress

After a timer recording has started, you can still cancel
the program.
• Press OPERATE.

Timer Recording Troubleshooting

Even though the timer is set, the recorder will not
record when:
• There is no disc (or tape) loaded.
• A non-recordable disc (or tape) is loaded.
• Disc Protect is set to ON in the Setup menu
(see page 27).
• Power is turned on.
• There are already 99 titles (DVD-RW, DVD-R) or 49
titles (DVD+RW, DVD+R) recorded on the disc.
You cannot enter a timer program when:
• A recording is already underway.
• The time you're trying to set has already passed.
• There are already 8 timer programs set.
If two or more timer programs overlap:
• The earlier program takes priority.
• When the earlier program finishes, the later program
starts.
• If two programs are set to start at exactly the same
time, the program entered first takes priority.
If the disc is damaged, the recording may not complete
successfully. In this case even though the Check field
shows "Rec. OK", it may not be.
Mode Check
30min SP Rec. OK
TIMER REC Timer Rec Close
43