Tspl Command Sets - Tally Dascom DL-310 User Manual

Tally Dascom DL-310

8.3 TSPL Command Sets

Commands Function
SIZE This command defines the label width and length
This command sets the height of the black line and the user-defined extra label feeding
BLINE
length each form feed takes.
BARCODE This command prints 1D barcodes
QRCODE This command prints QR code.
GAP Defines the gap distance between two labels.
REFERENCE This command defines the reference point of the label
SPEED This command defines the print speed
DENSITY This command sets the printing darkness
This setting is used to enable/disable the self-peeling function. The default setting for this
SET PEEL
function is off
This setting activates or deactivates the cutter and defines how many printed labels is to
SET CUTTER
be cut at one time
SET This setting activates or deactivates the cutter and defines how many printed labels is to
PARTIAL_CUTTER be cut at one time
This command is used to enable/disable feeding of labels to gap/black mark position for
SET TEAR
tearing off.
SET RIBBON This setting is used to enable/disable ribbon sensor detection
DIRECTION This command defines the printout direction
SHIFT This command moves the label's vertical position.
This command defines the selective, extra label feeding length each form feed takes,
which, especially in peel-off mode and cutter mode, is used to adjust label stop position,
OFFSET
so as for label to register at proper places for the intended purposes. The printer back
tracks the extra feeding length before the next run of printing.
BITMAP This command draws bitmap images
REVERSE This command reverses a region in image buffer
CLS This command clears the image buffer.
PRINT This command prints the label format currently stored in the image buffer
PUTPCX This command prints PCX format images
KILL This command deletes a file in the printer memory
"DOWNLOAD" is a header of the file that is to be saved in the printer's memory
DOWNLOAD
34
User Guide V1.0