Special Safety Instructions - Kayoba 002-163 Operating Instructions Manual

Hide thumbs Also See for 002-163:
Table of Contents

Advertisement

Available languages

Available languages

switched on and off with the power switch.
Remove the batteries from the machine
before maintenance or storage.
Store the machine out of the reach of children
when not in use. Never allow children, or
anyone who is unfamiliar with the machine
and these instructions, to use it.
Maintain the machine. Check that moving
parts are properly adjusted and do not
jam, and that no parts are incorrectly
fitted or damaged. Check for other factors
that could affect functionality.
If the machine is damaged it must be
repaired before using it again.
SERVICE
The machine must only be serviced by
qualified service personnel using identical
spare parts. This will ensure that the
machine remains safe to use.
Never try to open the machine. The
machine does not contain any parts that
can be repaired by the user. Modifying or
replacing internal components will cause
the machine to malfunction and will
invalidate the warranty.

SPECIAL SAFETY INSTRUCTIONS

A permit from the county administrative
board is required to use it (Sweden and
Norway).
All the stickers on the equipment must be
intact and legible. These markings contain
important safety information.
Always handle the equipment with care.
The circuit board and casing can be
damaged if the equipment is dropped,
which can lead to malfunctioning.
Insert the batteries with the correct
polarity. Do not mix different types of
batteries, or batteries with different
capacities or charging levels.
Follow local regulations for use,
excavations and findings. Obtain
permission from the land owner before
using the equipment on private land.
Use and store the equipment at normal
temperature. Extreme temperatures can
shorten the service-life of electronic
equipment and damage plastic parts.
Keep the equipment away from lamps,
televisions, computers and mobile
phones. They can all cause
electromagnetic interference.
Always use the correct tool for the job.
This tool is intended for specific
applications.
Never modify the equipment in any way.
Do not use the equipment for anything
other than the purpose for which it is
intended.
The warnings and instructions in these
instructions do not cover all the possible
situations that could occur. The user must
employ common sense and due caution.
EN
47

Advertisement

Table of Contents
loading

Table of Contents