Advertisement
QUICK-START GUIDE
10
Locate the switch and turn ON
your Conquest. In the unlikely
event that the car does not
operate, see the PAIRING /
BINDING instructions at the back
of this guide
11
Check the operation of the throttle
and steering. Pulling the throttle
trigger back will drive the car
forward, pushing the trigger forward
once will apply the brakes while
pushing the trigger forward twice
will drive the car in reverse. Turning
the wheel to the right will cause the
car to turn right and vice versa.
12
Use the throttle and steering trim
dials to fine-tune the controls of
your car. In doing so, ensure that
your Conquest tracks in a straight
line. Also that it doesn't creep
forwards or backwards at zero
throttle.
Full manual available to download from: www.Helion-RC.com
Advertisement
