Table of Contents
Advertisement
Available languages
Available languages
TECHNICAL DATA
HEDGE TRIMMER
TYPE
Input
V
voltage
Frequency
Hz
Power
W
Blade strokes
.../min
(no load)
(rpm)
Blade length
in (cm)
Blade gap
in (cm)
Blade brake
seg
time
Weight (not
including
lbs (kg)
electric cable)
Problem
Slow running, noisy or hot
blades.
Unit will not start.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned and authorized service locations. All BLACK+DECKER Service
Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. For more
information about our authorized service centers and if you need technical advice, repair, or genuine factory replacement
parts, contact the BLACK+DECKER location nearest you, or visit us at www.blackanddecker-la.com
BEHT201
BEHTs401
AR
B2C
B3
B2
220
220
120
220
50
50
60
60
420
500
1960
1835
18 (45)
22 (55)
5/8 (16)
3/4 (19)
< 1,0
4,21 (1,91)
5,6 (2,54)
TROUBLESHOOTING
Possible Cause
•
Dry, corroded blades.
•
Blades or blade support bent.
•
Bent or damaged teeth.
•
Loose blade bolts.
•
Lock off not fully operated.
•
Cable not plugged in.
•
Circuit fuse is blown.
•
Circuit breaker is tripped.
•
Cable or switch is damaged.
BR
127
60
Possible Solution
•
Lubricate blades.
•
Straighten blade or blade support.
•
Straighten teeth.
•
Tighten blade bolts.
•
Check that lock off is fully forward prior to
moving main trigger.
•
Plug cable into a working outlet.
•
Replace circuit fuse. (If the product
repeatedly causes the circuit fuse to blow,
discontinue use immediately and have it
serviced at a BLACK+DECKER service center
or authorized servicer.)
•
Reset circuit breaker. (If the product
repeatedly causes the circuit breaker to trip,
discontinue use immediately and have it
serviced at a BLACK+DECKER service center
or authorized servicer.)
•
Have cable or switch replaced at
BLACK+DECKER Service Center or
Authorized Servicer.
ENGlIsH
25
Advertisement
Table of Contents
