Modifying Fields And User Privileges; Module Interface Codes - Cabletron Systems Expansion module 9E429-36 Technical Manual

9E428-12/36 and 9E429-12/36 Module Specific Information

Modifying Fields and User Privileges

To modify fields on these modules, you must have read-write or super-user
privileges. If you have read-only privileges, you can view information; however,
you cannot modify any fields. For more information about user privileges and
community names, see the SmartSwitch 9000 Module Local Management User's
Guide.

Module Interface Codes

The 9E428-36 and 9E429-36 Ethernet Modules have 41 interfaces. The 9E428-12
and 9E429-12 Ethernet Modules have 17 interfaces. Table 1 lists the identifying
number, name, and description of each interface.
Interface
Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
2
Table 1. 9E428-36 and 9E429-36 Module Interface Codes
Interface
Name
SMB1
SMB10
HOST
LOCAL
INB
ENET1
ENET2
ENET3
ENET4
ENET5
ENET6
ENET7
ENET8
ENET9
ENET10
ENET11
ENET12
Interface
Description
1 Mbps System Management Bus
10 Mbps System Management Bus
i960 Host
i960 Controller
Internal Network Bus
Ethernet Front Panel Port 1
Ethernet Front Panel Port 2
Ethernet Front Panel Port 3
Ethernet Front Panel Port 4
Ethernet Front Panel Port 5
Ethernet Front Panel Port 6
Ethernet Front Panel Port 7
Ethernet Front Panel Port 8
Ethernet Front Panel Port 9
Ethernet Front Panel Port 10
Ethernet Front Panel Port 11
Ethernet Front Panel Port 12