Hydraulic Connection To The Internal Tank; Water Renewal; Electrical Connection - Wega MININIVA CLASSIC DUO Use And Maintenance Manual

5.4 Hydraulic connection to the internal
tank
In the versions with internal tank, follow the
instructions below:
Extract the tank from its housing;
carefully wash the tank with lukewarm water;
fill the tank with potable water;
place the tank correctly in place;
periodically check the level of water in the tank
and refill as required.
30
2
5
Q
Fill the tank only with cold potable water. Do not
use other types of liquids or carbonated beverages.
!
Operating without water may damage the machine.
After the machine has not been used for a period
of time it is necessary to replace the water in the
internal tank.
The change of the type of connection from tank
!
to water mains or viceversa must be carried out
by qualified personnel only. Any intervention may
compromise the machine's operation and safety.
5.5

Water renewal

In case of breaks longer than 1 week, it is neces-
sary to perform the changing of the 100% of the
water contained in the hydraulic circuits of the ma-
chine, by using the appropriate dispensing points,
as described in the paragraph "Installation report".
5.6

Electrical connection

Make sure that the information on the data plate
of the machine corresponds to the voltage of the
electrical mains;
plug the machine into the electrical mains.
2
5
Q
User manual