Download Print this page

Apple MA970LL - Mac Pro Manual

2 gb ram.
Hide thumbs

Advertisement

Congratulations, you and your Mac Pro
were made for each other.

Advertisement

   Related Manuals for Apple MA970LL - Mac Pro

   Summary of Contents for Apple MA970LL - Mac Pro

  • Page 1

    Congratulations, you and your Mac Pro were made for each other.

  • Page 2

    Finder Browse the contents of your computer using Cover Flow. www.apple.com/macosx Mac Help finder Spaces Arrange windows in different spaces to unclutter your desktop. www.apple.com/macosx Mac Help spaces Back to My Mac Access files on your Mac at home via the Internet —...

  • Page 3

    Collect all your video in one library. Create and share movies in minutes. www.apple.com/ilife/imovie iMovie Help movie GarageBand Create music by adding musicians to a virtual stage. Enhance your song to sound like a pro. www.apple.com/ilife/garageband GarageBand Help record...

  • Page 5: Table Of Contents

    Chapter 2: Life with Your Mac Pro 24 Basic Features on the Front of Your Mac Pro 26 Features of Your Apple Keyboard 28 Ports and Connectors on the Back of Your Mac Pro 30 More Ports and Connectors on the Back...

  • Page 6

    72 Problems with AirPort Wireless Communication 72 Problems with Your Display 75 Problems with Your Internet Connection 78 Using Apple Hardware Test 79 Reinstalling the Software That Came with Your Computer 80 Maximizing Ethernet Performance 81 Learning More, Service, and Support 83 Locating Your Serial Number Chapter 5: What’s Under the Hood...

  • Page 7

    Looking for Something? 110 Index Contents...

  • Page 9: Chapter 1: Ready, Set Up, Go

    Ready, Set Up, Go www.apple.com/macpro Mac Help Migration Assistant...

  • Page 10

    Many answers to questions can be found on your Mac Pro in Mac Help. For information about Mac Help, see “Getting Answers” on page 34. Apple may release new versions and updates to its system software, so the images shown in this book may be slightly different from what you see onscreen.

  • Page 11: Setting Up Your Mac Pro

    Setting Up Your Mac Pro Your Mac Pro is designed so that you can set it up quickly and start using it right away. Follow the steps on the next few pages to get started. Step 1: Position your Mac Pro and display Pick up your Mac Pro by both of its handles using correct lifting techniques.

  • Page 12

    Step 2: Plug in the power cord Plug the power cord completely into the recessed power cord socket on the back of your Mac Pro and plug the other end into a grounded outlet or a grounded power strip. Chapter 1 Ready, Set Up, Go Power cord socket Power cord plug...

  • Page 13

    Step 3: Connect the display Connect your display as shown in the illustration below. Depending on the display, you may have one or more cables to connect. Check the instructions that came with the display for additional setup information. You can connect two displays with Digital Visual Interface (DVI) connectors to the display ports on the back of your Mac Pro.

  • Page 14

    You can also connect displays that have an Apple Display Connector (ADC) or a video graphics array (VGA) connector using one of the following adapters: Â To connect a VGA display, use the Apple DVI to VGA Display Adapter included with your Mac Pro to connect the display to the DVI port.

  • Page 15

    Step 4: Connect an Ethernet cable To access the Internet or a network, connect one end of an Ethernet cable to either of the gigabit Ethernet ports on the back of your Mac Pro. Connect the other end to a DSL modem, cable modem, or Ethernet network.

  • Page 16

    Step 5: Connect the keyboard and mouse Connect the keyboard cable to one of the USB (d) ports on your Mac Pro or on the display. Plug the Mighty Mouse cable into a USB port on the keyboard. Plug the mouse into a USB port on the keyboard Keyboard Chapter 1...

  • Page 17

    You can quickly make your desktop look the way you want using System Preferences. Choose Apple () > System Preferences from the menu bar. As you get to know your Mac Pro, explore System Preferences—it’s your command center for most computer and display settings.

  • Page 18

    Need Help Setting Up? If you don’t see anything on your screen or you think your Mac Pro didn’t start up properly, check the following: Â Is your Mac Pro plugged into a power source? If it’s plugged into a power strip, is the power strip turned on? Â...

  • Page 19: Putting Your Mac Pro To Sleep Or Shutting It Down

    Â Press the power (®) button on the front of your Mac Pro and click Sleep in the dialogue box that appears. Â Choose Apple () > System Preferences, click Energy Saver, and set a sleep timer. To wake your Mac Pro from sleep, do one of the following: Â...

  • Page 20

    If you will not be using your Mac Pro for a day or more, you should turn it off. To turn off your Mac Pro, do one of the following: Â Choose Apple () > Shut Down. Â Press the power (®) button on the front of your Mac Pro and click Shut Down in the dialogue box that appears.

  • Page 21: Chapter 2: Life With Your Mac Pro

    Life with Your Mac Pro www.apple.com/macpro Mac Help ports...

  • Page 23

    The Apple website at www.apple.com links you to the latest Apple news, free downloads, and online catalogs of software and hardware for your Mac Pro. You can also find the manuals for many Apple products, and technical support for all of Apple’s products, on the Apple Support website at www.apple.com/support.

  • Page 24: Basic Features On The Front Of Your Mac Pro

    Basic Features on the Front of Your Mac Pro Optical drive Status light Second optical drive Headphone jack (optional) USB 2.0 ports (2) ® Power button FireWire 800 port FireWire 400 port Chapter 2 Life with Your Mac Pro...

  • Page 25

    CD-RW, DVD±R, DVD±RW, and DVD+R Double Layer (DL) discs. To open the drive, press the Media Eject ( ) key on your Apple Keyboard. If your Mac Pro has a second optical drive, press the Option and Media Eject ( ®...

  • Page 26: Features Of Your Apple Keyboard

    Features of Your Apple Keyboard Chapter 2 Life with Your Mac Pro Escape Decrease brightness Increase brightness Exposé Dashboard Caps Lock Fast Forward Mute Volume Down Volume Up Media Eject Function Play/Pause Rewind USB port (both sides)

  • Page 27

    Press the Escape (esc) key to exit Front Row. Brightness keys (F1, F2) Increase ( ) or decrease ( ) the brightness of your Apple display. Exposé All Windows key (F3) Open Exposé for quick access to all your open windows.

  • Page 28: Ports And Connectors On The Back Of Your Mac Pro

    Ports and Connectors on the Back of Your Mac Pro Power socket ¥ Locking latch USB 2.0 ports (3) FireWire 400 port FireWire 800 port Gigabit Ethernet ports (2) Chapter 2 Life with Your Mac Pro...

  • Page 29

    Power socket Connect the power cord that came with your Mac Pro. Don’t use ordinary power or extension cords. ¥ Locking latch Lift the latch to open the side panel and access the internal components in your Mac Pro. If you are working inside your Mac Pro and the latch is down, the optical and hard drives are locked in place.

  • Page 30: More Ports And Connectors On The Back

    More Ports and Connectors on the Back PCI Express expansion slots £ DVI display port 1 £ DVI display port 2 Optical digital audio out port Optical digital audio in port Audio line-in port Audio line-out port Chapter 2 Life with Your Mac Pro...

  • Page 31

    Connect displays that use a Digital Visual Interface (DVI) connector to the DVI display ports. Connect an Apple display, such as the 20-, 23-, or 30-inch Apple Cinema Display, to either port. You can also connect displays that use a video graphics array (VGA) connector using the Apple DVI to VGA Display Adapter that came with your Mac Pro.

  • Page 32: Internal Expansion Options

    Internal Expansion Options Optical drive carrier Hard disk drive carriers (4) Slots 2–4: PCI Express Battery Slot 1: Double-wide PCI Express graphics (graphics card installed) Top memory card Bottom memory card Chapter 2 Life with Your Mac Pro...

  • Page 33

    Optical drives Your Mac Pro comes with one or two DVD+R DL/DVD±RW/CD-RW SuperDrives in the optical drive carrier. To replace an optical drive, see “Replacing the Optical Drive” on page 55. Hard disk drive Your Mac Pro comes with up to four hard disk drives installed in the drive carriers. To install or replace the hard disk drives, see “Installing Internal Storage Devices”...

  • Page 34: Getting Answers

    Chapter 4, “Problem, Meet Solution,” on page 67. “Learning More, Service, and Support” on page 81. Or the Mac Pro Support website at www.apple.com/support/macpro. The Mac OS X website at www.apple.com/macosx. Or search for “Mac OS X” in Mac Help. “How to move to Mac” at www.apple.com/getamac/movetomac.

  • Page 35

    Using Front Row Burning a CD or DVD Mac Pro specifications Open System Preferences by choosing Apple ( Preferences. Or search for “system preferences” in Mac Help. Open System Preferences and choose the Keyboard & Mouse preference. Or open Mac Help and search for “mouse” or “keyboard.”...

  • Page 37: Chapter 3: Making A Good Thing Better

    Making a Good Thing Better www.apple.com/store Mac Help...

  • Page 38

    NOTICE: Apple recommends that you have an Apple-certified technician install memory, PCI Express cards, and internal storage devices. To contact an Apple Authorized Service Provider or Apple for service, see “Learning More, Service, and Support” on page 81. If you install these items yourself, you risk damaging your equipment, and such damage is not covered by the limited warranty on your computer.

  • Page 39: Opening The Mac Pro

    Opening the Mac Pro Before you open your Mac Pro, shut it down by choosing Apple () > Shut Down. NOTICE: Always shut down your Mac Pro before opening it to avoid damaging its internal components or the components you want to install. Do not open your Mac Pro or attempt to install items inside it while it is on.

  • Page 40

    Touch the metal on the outside of your Mac Pro to discharge any static electricity. Important: Always discharge static before you touch parts or install components inside your Mac Pro. To avoid generating static, do not walk around the room until you finish installing the cards, memory, or internal storage device and replace the side panel.

  • Page 41

    Unplug all the cables and the power cord from your Mac Pro. NOTICE: To avoid damaging internal components or the components you want to install, always unplug your Mac Pro. Don’t attempt to install items while it’s plugged in. Hold the side panel and lift the latch on the back. Chapter 3 Making a Good Thing Better...

  • Page 42

    Remove the side panel by pulling the top away from your Mac Pro and lifting up. Important: When you remove the side panel, hold it securely. Chapter 3 Making a Good Thing Better...

  • Page 43: Installing Memory

    Serial Presence Detect (SPD) feature has been programmed properly, as described in the JEDEC specification. To check the compatibility of your DIMMs, see the Macintosh Products Guide on Apple’s website at www.apple.com/guide. You can purchase Apple-branded memory online from the Apple Store at www.apple.com/store.

  • Page 44

    It’s important to install FB-DIMMs in matched pairs of equal size and equal specification. Use the table below and the instructions that follow as guidelines for DIMM placement. If you have Two DIMMs (standard configuration) Four DIMMs Six DIMMs Eight DIMMs To install memory: Shut down your Mac Pro, open it, and remove the side panel, following the instructions on page 39.

  • Page 45

    Using the two finger holes, pull on the memory cards to remove them, and then place them on a soft, clean cloth with the DIMMs facing up. Chapter 3 Making a Good Thing Better...

  • Page 46

    On the bottom memory card, open the ejectors on the DIMM slot and push them out to the sides, and then remove the DIMM from slot 1. Important: When installing or removing DIMMs, don’t touch the gold connectors on the DIMMs or the memory cards. Reinstall the DIMM you removed on the top memory card by aligning it in DIMM slot 2, as shown in the illustration, and pushing both ends of the DIMM down until the tabs are vertical and the ejectors snap into place.

  • Page 47

    If you add a second pair of additional DIMMs, install them on the top memory card in DIMM slots 3 and 4, the last two slots. Top memory card Bottom memory card If you add a third pair of additional DIMMs, install them on the bottom memory card in DIMM slots 3 and 4.

  • Page 48

    Lay your Mac Pro down on a soft, clean cloth on the desk or work surface to avoid scratching the work surface or your Mac Pro. Reinstall each memory card, pushing it straight down until it’s seated in the memory slot. Chapter 3 Making a Good Thing Better Memory slots...

  • Page 49

    Stand your Mac Pro up and replace the side panel. Important: When you replace the side panel, make sure the latch is up. Hold the side panel securely so it stays in place as you push the latch down. Place the side panel in the slot and then push to close.

  • Page 50

    Hold the side panel against your Mac Pro and push the latch down to secure the side panel. You can attach a lock or cable through the metal loop to secure your Mac Pro. Flip the lock tab down before you close the latch. Chapter 3 Making a Good Thing Better...

  • Page 51: Installing Internal Storage Devices

    To install SAS drives in your Mac Pro, you must also install the optional Mac Pro RAID Card. For more information about requirements or devices supported, visit an Apple Authorized Reseller, the Apple Store at www.apple.com/store, or the Mac Pro Support site at www.apple.com/support/macpro. Installing SAS or SATA 3 Gb/s Hard Disk Drives Your Mac Pro can accommodate up to four internal 1-inch-high SATA or SAS 3 Gb/s hard disk drives in the hard drive bays.

  • Page 52

    To install a hard disk drive: Open your Mac Pro and remove the side panel following the instructions that begin on page 39. Lift the latch to unlock the hard drive carriers. Important: When the latch is down, the carriers are locked in the drive bays and can’t be removed.

  • Page 53

    Position the carrier over the hard disk drive with the connectors at the rear. Use the four screws on the carrier to attach the hard disk drive to the carrier. Important: If the printed circuit board is exposed on the bottom of the hard disk drive, hold the drive by its sides.

  • Page 54

    Lift the latch and slide the carrier over the guides and into the drive bay, until it’s seated in the bay and snaps into the hard drive connectors. Replace the side panel and push the latch down to secure it. Chapter 3 Making a Good Thing Better Hard drive...

  • Page 55: Replacing The Optical Drive

    Replacing the Optical Drive Your Mac Pro comes with one or two SuperDrives installed in the optical drive bays. Follow these instructions to replace your optical drive. Important: Contact your drive manufacturer or consult the manufacturer’s website to determine if your drive is set to cable select mode. Before installation, set the drive to cable select mode if the manufacturer hasn’t already done so.

  • Page 56

    Disconnect the power and ribbon cables from the optical drive and remove the carrier. Important: When you install or replace the optical drives, use the original Apple cables that came with your Mac Pro. Chapter 3 Making a Good Thing Better...

  • Page 57

    Remove the optical drive from the carrier by unscrewing the four attachment screws. Use the four screws from the original optical drive to attach the replacement drive to the carrier. Chapter 3 Making a Good Thing Better...

  • Page 58

    Slide the optical drive and carrier over the guides halfway into the drive bay, Attach the power and ribbon cables to the back of the drive. Chapter 3 Making a Good Thing Better Power cable middle connector Ribbon cable end connector...

  • Page 59

    Lift the latch and then slide the optical drive carrier into the drive bay, pushing it into place. Replace the side panel and push the latch down to secure it. Chapter 3 Making a Good Thing Better...

  • Page 60: Adding Pci Express Cards

    Adding PCI Express Cards You can expand the capabilities of your Mac Pro by installing cards in the Peripheral Component Interconnect (PCI) Express slots. Your Mac Pro has one double-wide PCI Express graphics slot and three PCI Express expansion slots, for a total of four slots. These slots accommodate PCI Express graphics cards and expansion cards.

  • Page 61

    To install a PCI Express card: Open your Mac Pro and remove the side panel (see page 39). WARNING: To avoid damaging internal components or the components you want to · install, always turn off and then unplug your Mac Pro. Do not attempt to install items while it is plugged in.

  • Page 62

    Remove the port access cover from the slot in which you plan to install the card. Remove your new card from its static-proof bag and hold it by its corners. Don’t touch the gold connector or the components on the card. Chapter 3 Making a Good Thing Better PCI bracket...

  • Page 63

    Align the card’s connector with the expansion slot and press the card into the slot. Did You Know?—Installing a Full-Length PCI Card It may be easier to install a PCI card if you remove the hard disk drives and carriers, and remove adjacent cards.

  • Page 64: Replacing The Internal Backup Battery

    Press the card gently but firmly until the connector is fully inserted. Press only on the bare areas of the card to avoid damaging the components. Note: Don’t rock the card from side to side or force it. If you meet resistance, check the connector and slot for damage or obstructions, and then try inserting the card again.

  • Page 65

    Remove the old battery from the holder. WARNING: Installing the battery incorrectly may cause an explosion. Use only the · same type of battery or an equivalent recommended by the manufacturer of the original. Insert the new battery in the holder with the positive (+) side facing up. Replace the PCI Express cards that you removed (see page 60).

  • Page 67: Chapter 4: Problem, Meet Solution

    Problem, Meet Solution www.apple.com/support Mac Help help...

  • Page 68: Problems With Your Mac Pro

    You can also force quit by pressing the Esc, Option, and Command (x) keys at the same time. Restart your Mac Pro by choosing Apple () > Restart to be sure the problem is entirely cleared up. You can also restart by pressing the power (®) button for about 5 or 6 seconds until your Mac Pro shuts down.

  • Page 69

    A file on the disc may be in use. Quit applications that are open, and then try again. If that doesn’t work, choose Apple () > Restart and hold down either the mouse button or the Media Eject (C) key on your Apple Keyboard.

  • Page 70: Problems With Software

    To force an application to quit: Press Command (x)-Option-Esc or choose Apple () > Force Quit from the menu bar. Select the name of the application you want to quit in the Force Quit Applications dialogue.

  • Page 71: Keeping Your Software Up To Date

    Â Use Software Update to ensure that you have the latest drivers, bug fixes, and other updates. Â For problems with software from a manufacturer other than Apple, contact the manufacturer. If you have a problem using your computer or working with Mac OS X Â...

  • Page 72: Problems With Airport Wireless Communication

    Problems with Your Display NOTICE: If you have a problem with your Apple display and nothing in this manual solves it, contact an Apple Authorized Service Provider or Apple for assistance. If you attempt to repair the display yourself, any damage you may cause to the display will not be covered by the limited warranty on your display.

  • Page 73

    Or you may be able to adjust brightness or contrast using the Displays pane of System Preferences. Â Calibrate the display by choosing Apple () > System Preferences. Click Displays, select Color, and click Calibrate. For more information on color and your display, see Mac Help.

  • Page 74

    The operating system may reposition icons when you change the screen resolution. If the screen freezes  Force the frozen application to quit. Choose Apple () > Force Quit and select the application.  If that doesn’t work, force the computer to restart by pressing the power (®) button for 5 or 6 seconds until your Mac Pro shuts down.

  • Page 75: Problems With Your Internet Connection

    If the light on the front of the display is flashing On some Apple flat panel displays, the power light displays a series of short flashes when an error is detected. Â If you see a repeating sequence of three short flashes, the display is detecting input in the wrong video format.

  • Page 76

    If you are unable to connect to your Internet service provider using PPPoE, make sure you have entered the correct information in Network preferences. To enter PPPoE settings: Choose Apple () > System Preferences. Click Network. Click Add (+) at the bottom of the network connection services list, and choose PPPoE from the Interface pop-up menu.

  • Page 77

    For information about using an AirPort Base Station, search for “AirPort” Mac Help or visit the AirPort support website at www.apple.com/support/airport. If you cannot resolve the issue using these steps, contact your ISP or network administrator.

  • Page 78: Using Apple Hardware Test

    When the Apple Hardware Test main screen appears (after about 45 seconds), follow the onscreen instructions. Apple Hardware Test displays an error code if it detects a problem. Make a note of the error code before pursuing support options. If Apple Hardware Test doesn’t detect a hardware failure, the problem may be with your software.

  • Page 79: Reinstalling The Software That Came With Your Computer

    Use the software installation discs that came with your computer to reinstall Mac OS X and the applications that came with your computer. NOTICE: Apple recommends that you back up the data on your hard disk before restoring software. Apple is not responsible for any lost data. Installing Mac OS X To install Mac OS X: Back up your important files, if possible.

  • Page 80: Maximizing Ethernet Performance

    Insert the Mac OS X Install Disc 1 that came with your computer. Double-click “Install Bundled Software Only.” Follow the onscreen instructions. Select the destination disk for installation and continue following the onscreen instructions. Note: iCal, iChat, iSync, iTunes, and Safari are part of Mac OS X. To install these applications, follow the “Installing Mac OS X”...

  • Page 81: Learning More, Service, And Support

    Learning More, Service, and Support If your Mac Pro needs service, take it to an Apple Authorized Service Provider or contact Apple for service. You can find more information about your Mac Pro through online resources, onscreen help, System Profiler, or Apple Hardware Test.

  • Page 82

    AppleCare Service and Support Information Your Mac Pro comes with 90 days of telephone support and one year of service coverage at an Apple-authorized repair center. You can extend your coverage by purchasing the AppleCare Protection Plan. For more information, visit the website address for your country listed below.

  • Page 83: Locating Your Serial Number

    Locating Your Serial Number System Profiler shows the serial number of your Mac Pro. Open System Profiler, located in the Utilities folder in the Applications folder, and click the System Profile tab. The serial number is also on the configuration label, which is located on the back of your Mac Pro near the video ports.

  • Page 85: Chapter 5: What's Under The Hood

    What’s Under the Hood www.apple.com/macpro Mac Help System Profiler...

  • Page 86: Specifications

    Use System Profiler to find detailed information about your Mac Pro, including the amount of installed memory, hard disk size, connected devices, and product serial number. To open System Profiler, choose Apple () > About This Mac from the menu bar, and then click More Info.

  • Page 87: Graphics Card

     Must contain an Apple-approved heat sink (for best acoustic performance)  Must conform to JEDEC specification (see page 43)  Maximum height of 31 mm  Nonparity Graphics Card PCI Express or PCI Express 2.0 graphics card with two dual-link Digital Visual Interface (DVI) connectors.

  • Page 88

    PCI Express Expansion  Four full-length PCI Express expansion slots (slot 1 contains the graphics card)  Slots 1 and 2 are 16-lane, PCI Express 2.0 slots  Slots 3 and 4 are 4-lane, PCI Express 1. 1 slots  300 W combined maximum for all PCI Express slots SuperDrive (DVD+R DL/DVD±RW/CD-RW) Specifications Â...

  • Page 89: Usb Specifications

     Two USB 2.0 ports on the front  Three USB 2.0 ports on the back  Two USB 2.0 ports on the Apple Keyboard  Each USB port (front and rear) is on a separate 480 megabit-per-second (Mbit/s) USB channel Â...

  • Page 90: Ethernet Specifications

    Ethernet Specifications  IEEE 802.3 compliant  Maximum cable length: 100 meters (m)  Protocols: Open Transport, AppleShare, AppleTalk, NetWare for Macintosh, TCP/IP  Connector: RJ-45 for 10Base-T, 100Base-TX, and 1000Base-T  Media, 10Base-T: Category (CAT) 3 or higher UTP on 2 pairs up to 100 m Â...

  • Page 91

    Optical Digital Audio Specifications  Data format: Sony/Phillips Digital Interface (S/PDIF) protocol (IEC60958-3)  Connector type: TOSLINK optical (IEC60874-17)  Bits per sample: 16-bit or 24-bit Optical digital audio out Based on a typical situation with playback of 1 kHz, 0dBFS 24-bit sine wave, 44. 1 kHz output sample rate, unless otherwise specified below.

  • Page 92

    Analog Audio Specifications  Sample rate: 44. 1 kHz, 48 kHz, or 96 kHz  Jack type: 1/8” mini  Bits per sample: 16-bit or 24-bit  Frequency response: 20 Hz to 20 kHz, +0.5 dB/-3 dB Analog audio out using the headphone jack (typical values) Based on a typical situation with playback of 1 kHz, -3dBFS 24-bit sine wave, 44.

  • Page 93: Power Supply

    Analog audio line out (typical values) Based on a typical situation with playback of 1 kHz, -3dBFS 24-bit sine wave, 44. 1 kHz output sample rate into 100 kilohms unless otherwise specified below. Â Output voltage: 1.6 V (+6.3 dBu) Â...

  • Page 94: System Clock And Battery

    System Clock and Battery Your computer has CMOS custom circuitry with a long-life battery. Battery Use a 3-volt, CR 2032 Lithium coin cell replacement battery (see “Replacing the Internal Backup Battery” on page 64). Dimensions and Operating Environment Dimensions  Weight: 42.4 lbs. (19.2 kg) Weight depends on configuration.

  • Page 95: Chapter 6: Last, But Not Least

    Last, but Not Least www.apple.com/environment Mac Help ergonomics...

  • Page 96: Important Safety Information

    This chapter provides important information about safety procedures, routine maintenance, and ergonomic considerations for using your Mac Pro and display. For your safety and that of your equipment, follow these rules for handling and cleaning your Mac Pro and for working more comfortably. Keep these instructions handy for reference by you and others.

  • Page 97: General Maintenance

    Â If you plan to store your computer for an extended period of time, remove the battery. For service or questions about your warranty, contact an Apple Authorized Service Provider or Apple. Service and support information is included with your computer’s documentation.

  • Page 98: Protecting Your Optical Drive

    Â Do not touch the optical drive lens with your fingers. Do not wipe the lens with a paper towel or other abrasive surface. If you need to clean the lens, see an Apple Authorized Service Provider for a lens cleaner.

  • Page 99

    Maintaining Your Display To maintain your display and ensure its long life: Â Do not press on the surface of the display screen. Â Do not write on the screen or touch the screen with a sharp object. Â If you will not be using your computer for a day or more, turn off the computer and display or use Energy Saver.

  • Page 100: Understanding Ergonomics

    Understanding Ergonomics Here are some tips for setting up a healthy work environment. Â Use an adjustable chair that provides firm, comfortable support. Adjust the height of the chair so your thighs are tilted slightly and your feet are flat on the floor. The back of the chair should support your lower back (lumbar region).

  • Page 101

    Lower back supported Thighs tilted slightly More information about ergonomics is available on the web: www.apple.com/about/ergonomics 45–70 cm (18–28 in.) Top of the screen at or slightly below eye level (You may need to adjust the height of your display by raising or lowering your work surface.)

  • Page 102: Avoid Hearing Damage

     Avoid turning up the volume to block out noisy surroundings  Turn the volume down if you can’t hear people speaking to you Apple and the Environment Apple Inc. recognizes its responsibility to minimize the environmental impacts of its operations and products. More information is available on the web: www.apple.com/environment...

  • Page 103: Regulatory Compliance Information

    Important: Changes or modifications to this product not authorized by Apple Inc. could void the EMC compliance and negate your authority to operate the product. This product has demonstrated EMC compliance under...

  • Page 104

    Responsible party (contact for FCC matters only): Apple Inc. Corporate Compliance 1 Infinite Loop M/S 26-A Cupertino, CA 95014-2084 Wireless Radio Use This device is restricted to indoor use due to its operation in the 5. 1 5 to 5.25 GHz frequency range to reduce the potential for harmful interference to co- channel Mobile Satellite systems.

  • Page 105

    Taiwan Wireless Statements Taiwan Statement VCCI Class B Statement Mouse Class 1 LED Information The Apple Mighty Mouse is a Class 1 LED product in accordance with IEC 60825-1 A1 A2. It also complies with the Canadian ICES-003 Class B Specification.

  • Page 106

    This symbol indicates that your product must be disposed of properly according to local laws and regulations. When your product reaches its end of life, contact Apple or your local authorities to learn about recycling options. For information about Apple’s recycling program, go to www.apple.com/environment/recycling.

  • Page 107

    Taiwan: European Union—Disposal Information The symbol above means that according to local laws and regulations your product should be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. Some collection points accept products for free.

  • Page 109

    Looking for Something?

  • Page 110

    AirPort Extreme 35, 90 specifications 90 analog audio 92 line in 31, 92 line out 31, 92 AppleCare Service and Support 82 Apple Hardware Test 81 Apple Keyboard 27 applications Bluetooth File Exchange 35 force quit 68 freezing 70 Front Row 35...

  • Page 111

    F1 to F19 function keys 27 FB-DIMMs 33, 43, 86 Finder 34 FireWire 25, 29, 89 connections 35 devices 93 specifications 89 Force Quit 70, 74 Front Row application 35 key 27 frozen application 70 function (fn) key 27 general maintenance 97 graphics card 87 hand positions 100 hard disk drive 33, 51...

  • Page 112

    audio 31 display 13, 31 Ethernet 15, 29 FireWire 25, 29, 89 power 89 USB 16, 25, 29, 89 power button 17, 25 power cord 12 power requirements 93 power socket 29 power supply 93 problems connecting to Internet 76 processor 86 protective film 10 RAM 33, 43, 86...

  • Page 113

    Mighty Mouse™ & © 2007 CBS Operations Inc. All rights reserved. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Apple Inc. is under license. This product includes software developed by the University of California, Berkeley, and its contributors.

This manual also for:

Mac pro (early 2008, Mac pro

Comments to this Manuals

Symbols: 0
Latest comments: