Advanced Settings; Activating Or Deactivating Connections - Acer Allegro M310 User Manual

Advanced settings

Activating or deactivating connections

The quickest way to activate or deactivate a connection is via Quick Setup from
the Start screen.
This gives you one-tap access to airplane mode, Wi-Fi, Bluetooth, and cellular
settings.
Putting your smartphone in airplane mode
You can enter airplane mode (also known as flight mode) to turn off cellular, Wi-Fi,
Bluetooth, and FM radio functions and use your smartphone as a handheld device
during a flight. Check with your airline to make sure this is permitted onboard.
Switch your smartphone off during takeoff and landing as it may interfere with
aircraft electronic systems.
1. Tap Quick Setup on the Start screen.
2. Tap airplane mode and then tap the slider to turn airplane mode On or Off.
Note: When airplane mode is active, the
Setting up Wi-Fi
Tap Wi-Fi to set up your wireless connection. You can turn Wi-Fi On or Off by
tapping the slider.
When Wi-Fi is On, you will see a list of available access points. Tap the desired
access point to connect.
Tap advanced to add an SSID for an access point that is hidden.
Determining Wi-Fi signal strength
To determine the signal strength of available Wi-Fi networks, tap Quick Setup on
the Start screen, then tap Wi-Fi. Your phone will search for available networks and
display their signal strength.
Setting up Bluetooth
Tap the slider to turn Bluetooth On or Off. Once you have turned Bluetooth On it will
search for available devices.
Tap a device to pair.
Note: You may need to enter a PIN to pair with a device.
Activating or deactivating connections
icon will be displayed in the status bar.
32