Table of Contents
Advertisement
Removing Power Supply Module
The 500 Watt redundant power supply system consists of the power supply bay and either one or two
power supply models. The optional second module provides a redundant, 1+1 system.
CAUTION: If you do not have the second, redundant power supply module, you must take the server out
of service before replacing the single module.
1.
Squeeze the module handle to depress the latch that is the right side of the handle.
2.
Rotate the handle down while pulling the module toward you. As you pull the module out,
support the module with your free hand.
67
Chapter 3
Advertisement
Table of Contents
