Acer Altos G540 M2 Series User Manual page 159

Loading the onboard LSI SATA RAID default setting
1 In the onboard LSI RAID Configuration Utility, select Objects from
the Management menu.
2 Select Adapter from the Objects list.
The available adapter options will be displayed.
3 Press Enter in the adapter list.
The adapter settings will be displayed.
4 Select Factory Default, then YES to load the default settings.
5 Close the configuration utility.
6 Press Ctrl+Alt+Del to reboot the system.
Creating the RAID 1 volume
1 In the onboard LSI RAID Configuration Utility, select
Configuration from the Management menu.
2 Select New Configuration from the Configuration menu, then
select YES to continue.
An array selection window displays the devices connected to the
current controller.
3 Press the arrow keys to choose the specific physical drives, then
press the space bar to associate the selected drive with the current
array.
The indicator for the selected drive change from READY to
ONLINE.
4 Add two more drives to the current array, then press Enter.
5 Press Enter again to select another array to configure.
6 Press the space bar to select the array, then press F10 to configure
the logical drive.
7 Accept the default RAID level (RAID1), then press Enter to return
to the array selection window.
8 Press Enter to end the array configuration.
9 Select YES to save the configuration, then press any key to return
to the Configuration menu.
151