Beckhoff CX8190 Manual page 43

5. Click on the Adapter tab and then on Search.
6. Select the CCAT adapter.
No adapter will be displayed if you have not created a CCAT adapter in TwinCAT. Create a CCAT
adapter if you use real-time capable protocols.
ð The CCAT adapter appears under Adapter Reference.
You have successfully configured the Realtime Ethernet protocol. Connect further devices with Realtime
Ethernet to the Ethernet interface (X101/X102). Then switch the CX8190 to Config mode and scan for
the devices.
CX8190 Version: 1.5
Configuration
43