Assembly And Disassembly Procedures - Acer P203 Service Manual

ACER P203W
12
Go to cover page
4.1 Assembly procedures:
Connect the cable between power board(P802)
S1
and interface board (P301)
Connect the function key cable into interface
board(P306)
Connect the FFC cable into interface board
P301
P802
Take a bracket chassis base on a protective
S2
cushion and stick an insulator on the specific
position, take a power board and turn it over. Then,
put it on the specific positions of bracket chassis
base.
Use a Phillips-head screwdriver screwed the
S3
No.1~4 screws till that power board and bracket
chassis base firmly attached.(No1 screw
size=M4x8; No2~4 screw size=M3x6;
Torque=9~10KGFxCM).
3
4
Use a Phillips-head screwdriver screwed the
S4
No.1~4 screws till that interface board and bracket
chassis base firmly attached.
3
4

4. Assembly and Disassembly Procedures

FFC
P306
2
1
2
1
Take the key function cable out from the hole
S5
shown as photo
Fix the function key cable with a PVC tape
Turn the monitor faced down and put it on the
S6
Bracket Chassis module till both parts firmly
Take lamp cables out from the holes shown as
the photo.
Connect the FFC cable to the connector of the LCD
S7
panel.