DFI AL9A2 User Manual page 32

PC Health Status
This section only displays the hardware health monitor.
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Advanced
Voltage
VCore : +0.909 V
VBAT : +3.243 V
VDDQ : +1.331 V
VGFX : +0.926 V
1.0v : +1.046 V
Temperature
CPU ( o C/ o F) : +45 C / +113 F
FAN Speed
SYS FAN : 0 RPM
Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.
Chapter 4 BIOS Setup
Chapter 4
WatchDog Configuration
This section is used to configure WatchDog parameters.
 Select Screen
Select Item

Enter: Select
+/ -: Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
32
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Advanced
WatchDog1 function [Disabled]
Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.
WatchDog1 function
This field is used to enable or disable the Watchdog timer function. When enabled,
WatchDog1 Timer is available for setting.
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Advanced
WatchDog1 function [Enabled]
WatchDog1 Timer 20
Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.
WatchDog1 Timer
This field is used to set WatchDog time in seconds. The range is 1 to 255 seconds.
Enable/Disable Watch-
Dog Timer.
 Select Screen
 Select Item
Enter: Select
+/ -: Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Set WatchDog1 Time
(Sec).
Select Screen

 Select Item
Enter: Select
+/ -: Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
www.dfi .com