Removing The Doors - Kenwood KSBSB17 Installation Instructions Manual

installation

removing the doors

tool required: Philips style screwdriver / Flat bladed screwdriver
• Ensure the unit is unplugged and empty.
• To take the door off it is necessary to tilt the unit backwards. You should rest the unit
on something solid, e.g. a chair just below the top panel.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
1. Unscrew hinge cover by screwdriver.
2. Disconnect the harness.
10