Removing The Mainboard - Acer X1200 ED5200A - Aspire Service Manual

Removing the Mainboard

1. See "Removing the Side Panel" on page 34.
2. See "Removing the Font Bezel" on page 35.
3. See "Removing the Heat Sink Fan Assembly" on page 36.
4. See "Removing the Processor" on page 38.
5. See "Removing the Optical Drive" on page 40.
6. See "Removing the Hard Disk Drive" on page 42.
7. See "Removing the Memory Modules" on page 49.
8. See "Removing the PCI Card" on page 51.
9. See "Removing the Front I/O and Card Reader Boards" on page 53.
10. Disconnect the LED cable from the mainboard.
11. Remove the three screws (C, D) from the rear panel.
Screw (Quantity)
M3xL5 BZN (1)
Hex screw (2)
Chapter 3
Color
Black 5.5 to 6.5 kgf-cm
Silver
Torque
86.1A324.5R0
N/A
Part No.
N/A
57