Integrated Peripherals - Acer Veriton M275 Service Manual

Integrated Peripherals

Parameter
Onboard SATA Controller
Onboard SATA Mode
Onboard USB Controller
Legacy USB Support
USB Storage Emulation
Onboard Audio Controller
Onboard LAN Controller
Onboard LAN Option ROM
Serial Port1/Port2 Address
Serial Port2 Mode
Parallel Port Address
Parallel Port Mode
Parallel Port IRQ
ECP Mode DMA Channel
19
Description
Enables or disables the onboard SATA controller.
Select an operating mode for the onboard SATA.
Enables or disables the onboard USB controller.
Enables or disables support for legacy USB devices.
If Auto, USB device equal or less than 2GB will be emulated as Floppy
and remaining as harddrive. Forced FDD option can be used to force a
HDD formatted drive to boot as FDD (Ex.ZIP drive).
Enables or disables the onboard audio controller.
Enables or disables the onboard LAN controller.
Enables or disables the load of embedded option ROM for onboard
network controller.
Use this item to enable or disable the onboard COM1 serial port, and to assign a port address.
Use this item to select the parallel port mode. you can select Normal (Standard ParallelPort),
ECP(Extended Capabilities Port) EPP (Enhanced Parallel Port), or BPP (Bi-Direc-tional
Parallel Port).
Use this item to enable or disable the onboard Parallel port, and to
assign a portaddress.
Use this item to select the parallel port mode. You can select Normal
(StandardParallel Port), ECP (Extended Capabilities Port), EPP
(Enhanced Parallel Port), orBPP (Bi-Directional Parallel Port).
Use this item to assign IRQ to the parallel port.
Use this item to assign the DMA Channel under ECP Mode function.
Option
Enabled
Disabled
RAID
Native IDE
Enabled
Disabled
Enabled
Disabled
Auto
Floppy
Hard Disk
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Disabled/378/278/
3BC
Normal/EPP//ECP/
EPP+ECP
IRQ5
IRQ7
Chapter 2