Table of Contents
Advertisement
1 RJ45 LAN port
•
3 audio jack for 5.1 channel phone jack.
•
2 PS2 keyboard/mouse connector
•
On-board connectors
•
1 LGA775 socket.
•
2 DDR3 memory sockets.
•
1 PCI Express x16 slot.
•
2 PCI slot +1 PCI Express x 1 slot.
•
Two 2*5 pin Intel FPIO specification USB pin connectors(follow Intel FPIO standard Specification).
•
One 2*5 pin Intel FPIO spec. Microphone In/ Headphone Out pin connectors.
•
One 4 pin CPU Fan connector.
•
One 24pin ATX interface PS3/PS2 SPS connector.
•
One 4 pin CPU power connector.
•
One 2*7 pin front panel IO header.
•
One Jumper for clear CMOS.
•
One on board buzzer.
•
One reserved 2pin GPIO connector (for Intrusion).
•
1 LPT port header.
•
1 COM2 port header.
•
1 TPM header.
•
One 1*3 System FAN Header.
•
1 Internal speaker header.
•
1 OBR header.
•
1 FDD socket .
•
1 SPDIF header.
•
Buzzer
1 on board buzzer
•
System BIOS
BIOS Type: AMI with PackedBell skin.
•
Size:8Mb.
•
Power supply
300W/250W in stable mode (Acer Assign System Power Unit).
•
Design for Intel Eaglelake ICH7 series chipset compatible system.
•
Voltage design should be covered +5V, +3.3V, +12V, +5VSB, -12V (attention to 12V output capability).
•
Demand for both PFC/Non-PFC solutions.
•
Minimum 4 Serial ATA power connector solution should be included (by default).
•
Minimum 1 big 4-pin power connector included.
•
Minimum 1 small 4-pin power connector included.
•
PFC version will not provide switch selector for 115/230V AC input but it should be universal for Europe
•
and China.
Non-PFC version should provide switch selector for 115/230V AC input and universal for worldwide
•
PS2 style.
•
Chapter 1
3
Hide quick links:
Advertisement
Table of Contents
