Removing The Power Supply; Removing The Cpu Fan Sink - Acer Veriton 3500G Service Manual

Removing the Power Supply

1. See "Removing the Housing Cover" on page 72.
2. Disconnect the FDD power connector from the FDD drive and the DVD-ROM power connector from the
DVD-ROM drive.
3.
Remove the hard disk drive power connector from the hard disk drive.
4. Disconnect the main power connector and 12 Volt. power connector from the main board. Remove the
three screws that hold the power supply to the housing and detach the power supply from the housing

Removing the CPU Fan Sink

1. See "Removing the Housing Cover" on page 72
2. See "Removing the FDD and DVD Frame" on page 74"
3. Disconnect the fan sink cable from the main board, and then release the two levers on both sides of the
fan sink.
.
Chapter 3 81