7.
Remove the screws securing the graphics card riser board, then remove the riser board from the bracket.
Quantity
2
A circuit board that is >10 cm
above image. Follow local regulations for disposing this type of circuit board.
Removing the System Fan
1.
Remove the wall mount plate by following the procedure described on page 43.
2.
Remove the graphics card assembly by following the procedures described on page 44.
3.
Cut the cable tie securing the system cables.
Make sure you have a replacement cable tie for when you reassemble the machine back.
46
Color
Torque
Chrome
4.5 ± 0.3 kgf-cm
2
has been highlighted with a yellow rectangle as shown in the
Aspire Z3760 / Z3761 / Z5760 / Z5761 AIO Computer Service Guide
Part Number
86.00B75.240