Table of Contents
Advertisement
PROPER CARE & DESCALING
General Cleaning
Perform: As needed
Time Required: 5 minutes.
Note: Do NOT use abrasive materials or chemical cleaners.
1. Clean cabinet surfaces with a soft cloth and warm soapy water
2. Wipe dust from back of dispenser to improve efficiency.
3. Remove drip tray assembly by sliding it forward. Remove cover. Place tray and cover in dish-
washer or wipe parts clean with a soft cloth and warm soapy water.
4. Reattach drip tray assembly.
Sanitizing
Perform: Every 3 months or whenever an off-taste occurs.
Time Required: 30 minutes.
Note: Best done prior to loading a fresh bottle.
Step A: Remove Existing Water
1. Move the dispenser away from the wall and rotate it so that the drain plug is accesible.
2. Turn the power switches to OFF.
3. Unplug the power cord from the wall outlet.
4. Remove water bottle and probe from water bottle.
5. Place a 2 gallon or larger bucket under the drain plug in the rear
of the dispenser.
6. Use a screw driver to remove screw holding drain tap and
remove drain plug. Cold water will immediately flow into the
bucket. After several seconds, hot water will dispense.
Reminder - Place the drain cap and plug in a safe location so that
they will not be lost.
7. Once the unit has been drained, replace the drain plug and the
drain cap and secure using the screw.
8. Remove the remaining water from the reservoir by dispensing
from the cold tap into a pitcher.
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-855-594-4755 for assistance.
Model # 8LIECHK-SSF-WL: Page 11
Hide quick links:
Advertisement
Table of Contents
