Connecting Case Components
After you have installed the motherboard into a case, you can begin connecting themotherboard components.
Refer to the following:
1.
Connect the CPU cooling fan cable to CPU_FAN.
2.
Connect the standard power supply connector to ATX_POWER.
3.
Connect the case switches and indicator LEDs to the F_PANEL.
4.
Connect the system cooling fan connector to SYS_FAN.
5.
Connect the auxiliary case power supply connector to ATX12V.
CPU_FAN: CPU Cooling FAN Power Connector
Pin
Signal Name
1
GND
2
+12V
3
Sense
4
PWM
Aspire AX1920 Service Guide
Function
System ground
Power +12V
Sensor
PWM
75